Unlock a world of possibilities! Login now and discover the exclusive benefits awaiting you.
Hello
We have a Qlik CDC only task and we performed a modification on a filer transformation on a table.
We stopped that task , perform Import task with the desired modifications and perform (for mistake) resume processing of the same task.
The filer was loaded correctly (and unexpectedly !)
We remember in the past documentation that , if we have to perform a filter modification, we are aware that we will perform stop+import of the task (or perform modification by Qlik Enterprise Manager GUI and save the currently running task) and perform reload target
Can you explain us what happened ? in what case resume processing is acceptable for filter modifications scanarios ?
Lt us know
Regards
Alessandro Ferrario
Data Quality, Preparation & Stewardship
Hello,
I want to remove a colum from dynamic type input in tjavarow.
I tried this but it didn't work :
Dynamic dyn = row3.table;
dyn.removeColumn("NameColonneToDelete");
Can anyone help me ?
Thanks
Hello,
I have this load script for one of my app in Qliksense.
Table1:
Load
First_Name,
Last_Name,
Salary,
Fiscal_Year
SQL Select
FirstName as First_Name,
LastName as Last_Name,
Salary,
FY as Fiscal_Year
From XYZ_Table
In the sheet, I have this simple table with Fiscal_Year column that shows all the data for all the years.
User requested to filter the data to only shows the current year and two previous years. I have adjusted my code to this:
Table1:
Load
First_Name,
Last_Name,
Salary,
Fiscal_Year
SQL Select
FirstName as First_Name,
LasrName as Last_Name,
Salary,
FY as Fiscal_Year
From XYZ_Table
WHERE Fiscal_Year >= (YEAR(GETDATE())-2); //to get only year 2024 and 2023,2022//
It loaded successfully and I got no errors, but when I go to my table in the sheet, I still see years from 2016-2021
I am not sure what I am missing. Could someone please help me with this?
thank you!
Is there any way to remove Cloud Engine from the Task Config in Cloud? I have a cluster I run of servers on AWS setup and I do not use Cloud Engine at all. I have a separate workspace (not default) and it still shows 2 cloud engines in my drop down when configuring a task. Even though I have it turned off. I would prefer not to see Cloud if cloud is turned off. Every job we setup defaults to cloud and we have to change it to our cluster each time.
Preciso achar o Valor da Coluna 1 * Coluna 2(Relativo). Mas não estou conseguido.
Preciso criar um set analysis que trate (Pois o valor correto é diferente).
Preciso de ajuda.
Cod | Valor | Rank(Relativo) | (Column(1) * Column(2)) / 1000000 (Errado) |
Valor Correto |
2061 | 300000 | 4,69% | 9.689,40 | 14.070,00 |
5277 | 300000 | 21,21% | 43.817,70 | 63.630,00 |
5543 | 300000 | 3,36% | 6.932,70 | 10.080,00 |
10757 | 300000 | 7,27% | 15.025,80 | 21.810,00 |
12305 | 300000 | 4,10% | 8.461,80 | 12.300,00 |
13248 | 300000 | 3,01% | 6.213,00 | 9.030,00 |
13697 | 300000 | 11,97% | 24.739,50 | 35.910,00 |
16923 | 300000 | 6,23% | 12.882,30 | 18.690,00 |
17459 | 300000 | 24,93% | 51.509,10 | 74.790,00 |
19201 | 300000 | 5,18% | 10.710,90 | 15.540,00 |
19303 | 300000 | 6,45% | 13.333,80 | 19.350,00 |
29976 | 300000 | 1,60% | 3.307,50 | 4.800,00 |
300.000,00 |
Hi,
I'm working on financial KPI's and want to use the balance sheet as well as the P&L for analysis.
The differences is that in the balance sheet you have an ingoing balance and then the changes during the month is booked and then you get an outgoing balance, in my dataset there is no ingoing balances available from the database from any tables that I've found.
I want to to a rolling 12 months analysis on inventory turnover rate and need to be able to calculate averages for a twelve months period every month ending to get this KPI.
I've added the ingoing balance for 2021-05-01 manually and concatenated with the transaction data, from this I can get an outgoing balance every month with RangeSum and Above where I've set period of times to 100000, (maybe there is a smarter way) which gives me the outgoing balance every month.
RangeSum(Above(Sum({<Sub_Group={'Inventory'}>}Amount),0,100000),)
How do I use this? I need to bring the value from 2021-05-01 to 2024-03-31 for example to be able to get my outgoing balance for 2024-03-31, see example below.
Is there a way to make a calculated field instead to use in set analysis or any other way that is more simple just shoot with ideas!
Help much appreciated, thanks!
Hi,
If the developer forgets to check the "initial data reduction based on section access" button under Document Properties - the Section access in the script is not in affective. no data reduction is done.
We have more than 200 models, how can I verify that the developer remembered to check it?
how can I get an indication/report that the "initial data reduction based on section access" is checked (except from opening 200 models and see if it is checked)?
Thanks, Elad.
Seems like I misunderstood how the Set Modifier is meant to work. Would appreciate if someone can clear things up for me. I'm attaching a sample application which I'm working from. In the application is a simple data model with a table for games, a table for invites, and a table for participant.
What I'm trying to count is the number of times a person has chosen to ignore their invite and not participate in the game in a table format where the dimension is the person. Should be pretty simple.
The number of games they have been invited to is : sum({<NumInvites = {1}>} NumGames)
The number of games they participated in is : sum({<NumParticipations = {1}>}NumGames)
Shouldn't the number of games they chose not to participate in be the difference between the two sets?
=Sum({
<NumInvites= {1}> -
<NumParticipations = {1}>
} NumGames)
And, yes, I know I can change the logic to
sum({<NumInvites = {1}>} NumGames) - sum({<NumParticipations = {1}>}NumGames)
but I want to understand why the difference in SetModifiers does not work.
Hello,
I am trying to develop a chart extension. I created a dropdown in the extension properties field. I want to make multiple selections from the data listed in the dropdown. Do you have a solution?
Wondering about Qlik Talend Data Integration Sessions? There are 11, in addition to all of the Data & Analytics. So meet us in Orlando, June 3 -5.
Browse our helpful how-to's to learn more about navigating Qlik Community and updating your profile.
Join us on April 24th at 10 AM ET for the next Do More with Qlik webinar focusing on Qlik’s Data Integration & Quality solutions.
Your journey awaits! Join us by Logging in and let the adventure begin.
Qlik enables a frictionless migration to AWS cloud by Empresas SB, a group of Chilean health and beauty retail companies employing 10,000 people with 600 points of sale.
Qlik Luminary Stephanie Robinson of JBS USA, the US arm of the global food company employing 70,000 in the US, and over 270,000 people worldwide.
Join one of our Location and Language groups. Find one that suits you today!
A private group is for healthcare organizations, partners, and Qlik healthcare staff to collaborate and share insights..
Qlik Communityの日本語のグループです。 Qlik製品に関する日本語資料のダウンロードや質問を日本語で投稿することができます。
Welcome to the group for Brazil users. .All discussions will be in Portuguese.
Hear from your Community team as they tell you about updates to the Qlik Community Platform and more!