Unlock a world of possibilities! Login now and discover the exclusive benefits awaiting you.
Hello,
Since last week, i can't see my dashboard modification on Chrome ? (same things for others navigators)
Here is what i do :
- I open a .qvw document
- I do modification
- I reload the document by pressing Ctrl+R
- I save the document by pressing Ctrl+S
- I open the management console and i reload the dashboard
- I open the document with Chrome but i don't see my modifications ?
- I reboot QV server => nothing changes
- i delete the Chrome cache => nothing changes
I always can't see modifications.
Any ideas of my problem ?
Thanks for help.
Stéphane
severals dashboards have the problem
Sure it's strange ... some fews days ago everything work fine ...
If you make the change directly in the qvw, and then don't reload from the QMC, does the modifcation then go through?
I'm thinking that the change might be overwritten when you reload and distribute the document.
When you run the task it will reload the document from the source folder (QMC > System > Setup > Distribution Services > General > Source folder) and if it's set to distribute, it might then overwrite the document that you just edited.
I did a simple modification in my document, then i saved it.
when i try to look at it in Chrome i've got an error message because i use restrited access file.
so i can't see the result, i need to reopen it and reload and save to see it.
and the source folder seems to be ok
But you have mounted a Document folder and are using the same one as a source folder?
What if you modify so you have a separate source folder, reload and distribute the document to the mounted folder, that is not source folder
And you are using that folder as application data folder as well?
You should change that so that you have a isolated Application datafolder that you don´t store qvw at all in.
I would start with getting a proper setup so you have everything in order so you know what file is being modifed to what folder.
As now, you modify source documents that are also being hosted to Accesspoint
Hello I had the same problem a while ago,
I changed a dashboard and the change has not appeared online.
Also, if I removed a dimension from a table, online I took it off and if I tried to add it again, online did not see me.
Solution: Ctrl + C on the modified object-> Removing the object-> Ctrl + V-> Save-> Reload the document from a task on server-> ALL APPEARS MAGICALLY!!!
I've not installed QV
Could you explain me the difference about theses folders and where i can configure it ?
Document Folder :
Source Folder :
Application Data Folder :
Stéphane
Hi,
Can you post the document log and the task log?
Bill
Task Log :
04/04/2014 14:00:54.0225117 Information Starting task 'Reload of ROCHE MSM\ROCHE MSM.qvw'. Id:65961ccf-aa77-4678-bc1c-fc9a748b3ed6. Triggered by 'ManualStartTrigger'. Id:00000001-0002-0003-0405-0607080a0b0c
04/04/2014 14:00:54.0225117 Information Entering Task Execution.
04/04/2014 14:00:54.0225117 Information ClusterID=1
04/04/2014 14:00:54.0225117 Information QDSID=74a8f721-72b2-be00-d6da-5fb9c521a91f
04/04/2014 14:00:54.0225117 Information TaskID=65961ccf-aa77-4678-bc1c-fc9a748b3ed6
04/04/2014 14:00:54.0225117 Information MaxRunTime=1.00:00:00
04/04/2014 14:00:54.0225117 Information MachineName=315411-WEB04
04/04/2014 14:00:54.0225117 Information Max attempts:1
04/04/2014 14:00:54.0225117 Information Current Attempt=0
04/04/2014 14:00:54.0225117 Information Task Dependencies are OK
04/04/2014 14:00:54.0225117 Information Document is marked to be Reloaded with fresh data. Initializing Reload for Distribution.
04/04/2014 14:00:54.0225117 Information Opening "C:\QLIKVIEW\Published-Applications\ROCHE MSM\ROCHE MSM.qvw"
04/04/2014 14:00:54.0225117 Information Allocating new QlikView Engine. Current usagecount=1 of 4
04/04/2014 14:00:54.0225117 Information Max retries:5
04/04/2014 14:00:54.0225117 Information Attempt:01
04/04/2014 14:00:54.9117133 Information Allocated QlikView Engine successfully. Current usagecount=1 of 4, Ticket=417
04/04/2014 14:00:54.9117133 Information Loading document "C:\QLIKVIEW\Published-Applications\ROCHE MSM\ROCHE MSM.qvw" (2.32 Mb)
04/04/2014 14:00:55.9257151 Information Loading. LoadTime=00:00:01.0140018
04/04/2014 14:00:57.9537186 Information Loading. LoadTime=00:00:03.0420053
04/04/2014 14:00:58.1565189 Information Physical FileSize=2.32 Mb. Memory Allocation Delta for this file=45.33 Mb. Available Physical Memory Before Open=9359.04 Mb. Available Physical Memory After Open=9310.43 Mb. Total Physical Memory=16378.38 Mb.
04/04/2014 14:00:58.1721190 Information Attempted to load the document without data.
04/04/2014 14:00:58.1721190 Information The document was loaded successfully.
04/04/2014 14:00:58.1721190 Information Document was opened successfully
04/04/2014 14:00:58.1721190 Information Starting reload
04/04/2014 14:00:58.1877190 Information QlikView->Settings->Document Peferences->Generate Logfile in document is not set.
04/04/2014 14:00:58.1877190 Information The Source Document is being reloaded. DocumentPath=C:\QLIKVIEW\Published-Applications\ROCHE MSM\ROCHE MSM.qvw
04/04/2014 14:00:58.2189191 Information The Source Document reload complete. DocumentPath=C:\QLIKVIEW\Published-Applications\ROCHE MSM\ROCHE MSM.qvw
04/04/2014 14:00:58.2189191 Information Memory Allocation Delta for this file=3.31 Mb. Available Physical Memory Before Reload=9310.41 Mb. Available Physical Memory After Reload=9309.50 Mb. Total Physical Memory=9309.50 Mb.
04/04/2014 14:00:58.6089197 Error The Source Document was NOT reloaded successfully. DocumentPath=C:\QLIKVIEW\Published-Applications\ROCHE MSM\ROCHE MSM.qvw.
04/04/2014 14:00:58.6245198 Information Closing the document.
04/04/2014 14:00:59.2641209 Information Closed the QlikView Engine successfully. ProcessID=7112
04/04/2014 14:00:59.2641209 Error The task "Reload of ROCHE MSM\ROCHE MSM.qvw" failed. Exception:
QDSMain.Exceptions.DistributionFailedException: Distribute failed with errors to follow. ---> QDSMain.Exceptions.ReloadFailedException: Reload failed ---> QDSMain.Exceptions.LogBucketErrorException: The Source Document was NOT reloaded successfully. DocumentPath=C:\QLIKVIEW\Published-Applications\ROCHE MSM\ROCHE MSM.qvw.
at QDSMain.ReloadTask.VerifyConditions(TaskResult taskResult)
at QDSMain.ReloadTask.Reload(String fileName, TaskResult taskResult, String sectionAccessUserName, String sectionAccessPassword, eReloadOptions reloadOption, String variableName, String variableValue, Boolean moniterCpuUsage)
--- End of inner exception stack trace ---
at QDSMain.ReloadTask.Reload(String fileName, TaskResult taskResult, String sectionAccessUserName, String sectionAccessPassword, eReloadOptions reloadOption, String variableName, String variableValue, Boolean moniterCpuUsage)
at QDSMain.DistributeTask.Execute(TaskResult currentTaskResult)
--- End of inner exception stack trace ---
at QDSMain.DistributeTask.Execute(TaskResult currentTaskResult)
at QDSMain.Task.AbstractTask.TaskExecution(ILogBucket logBucket, TaskResult taskResult)
04/04/2014 14:00:59.2641209 Information Task Execute Duration=00:00:05.2416092
04/04/2014 14:00:59.2641209 Information TaskResult.status=Finished
04/04/2014 14:00:59.2641209 Information Notifying all triggers of new state:FinishedWithErrors
04/04/2014 14:00:59.2641209 Information Notifying all triggers of new state:FinishedWithErrors - completed
04/04/2014 14:00:59.2641209 Information Saving Task Result
Hi,
The reload has failed and that is the reason the document is not being updated.
6089197 Error The Source Document was NOT reloaded successfully.
Need to log at the document log to see where the failure happen in the script. If there is section access applied to the document you need to make sure the service account has full rights to all the data.
Bill