Skip to main content
Announcements
Have questions about Qlik Connect? Join us live on April 10th, at 11 AM ET: SIGN UP NOW
cancel
Showing results for 
Search instead for 
Did you mean: 
Not applicable

SAP EXPORT_BUFFER_NO_MEMORY error

Some Qlikview extracts are abending on the SAP side with the message "EXPORT_BUFFER_NO_MEMORY".
The error points to the parameter "rsdb/obj/buffersize".

In Qlikview the error appears as :


Custom read failed
SQL SELECT *
FROM KNA1



Running RSPFLDOC via SE38 shows the parameter values:

Appl.area: General system
Parameter Type: Integer Value
Changes allowed: Change permitted
Valid for oper.system: All
Minimum: 16
Maximum: 256,000
DynamicallySwitchable: (blank)
Same on all servers: (blank)
Dflt value: 4096
Profile value: 20000
Current value: 20000

Has anyone else encountered this error?
How do others have "rsdb/obj/buffersize" configured?
Thanks,
Ben

1 Solution

Accepted Solutions
disqr_rm
Partner - Specialist III
Partner - Specialist III

Your buffersize seems to be very low, but it all depends on how much data you are exporting. How many record you have in KNA1?

I got following buffer size in my system, but this could vary in many ways and depends on many other profile parameters. You should check with your basis guys what can be adjusted with exisitng hardware (available memory, etc.).

Dflt value 4096
ProfileVal 400000
Current value 400000

Hope this helps.

View solution in original post

27 Replies
disqr_rm
Partner - Specialist III
Partner - Specialist III

Your buffersize seems to be very low, but it all depends on how much data you are exporting. How many record you have in KNA1?

I got following buffer size in my system, but this could vary in many ways and depends on many other profile parameters. You should check with your basis guys what can be adjusted with exisitng hardware (available memory, etc.).

Dflt value 4096
ProfileVal 400000
Current value 400000

Hope this helps.

Not applicable
Author

Thanks for the quick response. KNA1 has 90,000 records.

disqr_rm
Partner - Specialist III
Partner - Specialist III

It's not too much. Ask your basis guys to analyze the ABAP dump and adjust buffer parameters. You may also want to play with SAP Connector settings (buffer, packet sizes, etc.) it's all documented well in SAP Connector installation guide.

tmumaw
Specialist II
Specialist II

Rakesh,

Hi. We just upgraded to 9.0 SR4 / SAPConnector Version 5.4. We were on 9.0 SR3 / SAPConnector 5.3 in our development environment and things were working fine. Well a new release of connector came out and we upgraded. Now we are getting the following:

SQL Select *
5/19/2010 13:34:32.1026415 Information 05/19/10 13:34:31: 1472 FROM KNVV
5/19/2010 13:34:32.1026415 Information 05/19/10 13:34:31: 12 fields found: %KNVV, Ship To, %SalesOffice_Key, Customer Emp NonEmp, Customer Acct Assignment Grp, Customer Payment Terms, Customer Invoice Periods, Customer Grp1, Customer Grp2, Customer Grp3, Customer Acquisition,
5/19/2010 13:42:43.3717842 Information Customer Grp5, 1,759,503 lines fetched
5/19/2010 13:42:46.6534752 Information 05/19/10 13:42:43: 1475 store KNVV into qvd\KNVV_SalesOrg.qvd
5/19/2010 13:42:46.8722546 Information 05/19/10 13:42:46: 1478 drop table KNVV
5/19/2010 13:42:46.8722546 Information 05/19/10 13:42:46: 1485 [ADRC]:
5/19/2010 13:42:46.9035088 Information 05/19/10 13:42:46: 1486 Load
5/19/2010 13:42:46.9035088 Information 05/19/10 13:42:46: 1487
5/19/2010 13:42:46.9035088 Information 05/19/10 13:42:46: 1488 [ADDRNUMBER] as [Customer AddrKey],
5/19/2010 13:42:46.9191359 Information 05/19/10 13:42:46: 1489 [HOUSE_NUM1] as [Customer House Number],
5/19/2010 13:42:46.9191359 Information 05/19/10 13:42:46: 1490 [STREET] as [Customer Street],
5/19/2010 13:42:46.9191359 Information 05/19/10 13:42:46: 1491 [SORT1] as [Customer Search Term 1],
5/19/2010 13:42:46.9347630 Information 05/19/10 13:42:46: 1492 [SORT2] as [Customer Search Term 2]
5/19/2010 13:42:47.2629321 Information 05/19/10 13:42:46: 1494 SQL SELECT *
5/19/2010 13:42:47.2629321 Information 05/19/10 13:42:46: 1495 FROM ADRC
5/19/2010 13:42:47.2629321 Information 05/19/10 13:42:47: 5 fields found: Customer AddrKey, Customer House Number, Customer Street, Customer Search Term 1,
5/19/2010 13:51:26.3483128 Information Customer Search Term 2, Error: Custom read failed
5/19/2010 13:51:26.5670922 Information 05/19/10 13:51:26: General Script Error
5/19/2010 13:51:26.5670922 Information 05/19/10 13:51:26: Execution Failed
5/19/2010 13:51:26.5670922 Information 05/19/10 13:51:26: Execution finished.

We have checked all authorizations in SAP, did a trace in SAP and everything is fine. Any ideas?

I checked our buffer sizes and they are 4096, 55000, 55000. We are trying to process 1.8 million rows of data.

Thanks

Thom

disqr_rm
Partner - Specialist III
Partner - Specialist III

Hi Thom,

Looking into error log you posted, it seems there is a problem with your script and nothing with SAP. Possible that you could post your QVW here?

tmumaw
Specialist II
Specialist II

Thanks Rakesh. I am out of the office sick today, but I will post it tomorrow. We upgraded our DEV environment to 9.0 SR3 with SAPConnector 5.3 and everything ran fine. We then upgraded one more time to 9.0 SR4 with SAPConnector 5.4. I made no changes to my QVW. Is there something different in 5.4 vs. 5.3 of the SAPConnector?

Thanks
Thom

disqr_rm
Partner - Specialist III
Partner - Specialist III

Nope, nothing I noticed. As long as you have imported the new transport requests, and correct versions of them based on your R/3 version, it should work just fine. Do post your QVW and I can run it through my env to see if it works for me or not.

Get well soon.

Rakesh

tmumaw
Specialist II
Specialist II

Rakesh,

Maybe you can explain this to me. Most of my select statements are select *, they all work except for one (ADRC) table in SAP. I listed the fields I am selecting and it works fine. Here is one that I listed the fields I am selecting and it aborts.

Custom read failed
SQL Select ZORDER ZACTIVITY ZSTATUS ZWDATE ZHOURS
from ZTRPST where ZWDATE >= '20100103' and ZEMPEQP = 'P'
and ZORDER between '000040000000' and '000049999999'

Thanks

Thom

tmumaw
Specialist II
Specialist II

We upgrade to 9.0 SR4 and SAP Connector 5.4 SR1. We are now getting the following error on the SAP side. Any ideas?

Timeout reached while waiting for clear memory