topic Re: Qlikview Nprinting 16.2 migration to 19+ in Qlik NPrinting

Qlikview Nprinting 16.2 migration to 19+

dhavalp7 — Tue, 28 Dec 2021 08:34:08 GMT

We are currently using Nprinting Designer & Server 16.2. On the same machine (App server), we have Qlikview & Qlikview Server with version 11.20 SR 8 installed. The configuration has perfectly worked fine for the last 4 years. As Nprinting 16.2 is not compatible with TLS 1.2 we would have to upgrade to a higher version of Nprinting. In order to upgrade to Nprinting 19+,

Is it compulsory to upgrade the Qlikview & Qlikview Server to 12.60?
Also, we have a Qlikview Web server VM, If we upgrade the Qlikview Server on App server VM, should we have to upgrade the Qlikview & Qlikview server on Web VM as well?

Re: Qlikview Nprinting 16.2 migration to 19+

Lech_Miszkiewicz — Tue, 28 Dec 2021 09:18:48 GMT

Hi,

NPrinting 16X is not supported anymore. Migration (not upgrade!!!) is possible only from NPrinting 16.3.

Whole process is complex and needs to be properly planned. You need to be aware of required setup (dedicated servers, supported configurations etc..) Also you would have to inspect all reports you have to check if they will be compatible after migration. I am not understanding fully your questions in regards to migration to new nprinting. Requirements are listed in links below (also regarding supported QlikView versions)

Whole migration process is complex and should be done by experienced NPrinting developer as there are many things which you have to consider and plan ahead.

All requirements are available on https://help.qlik.com so i suggest to study that. It is a lot to go through.

Intro: https://help.qlik.com/en-US/nprinting/May2021/Content/NPrinting/Introduction/Introduction.htm
Installation and requirements of new NPrinitng May 2021 SR3: https://help.qlik.com/en-US/nprinting/May2021/Content/NPrinting/DeployingQVNprinting/Planning-your-deployment.htm
Migration https://help.qlik.com/en-US/nprinting/May2021/Content/NPrinting/Migrate/Before-you-migrate.htm

There are many differences between NPrinting 16 and 17+ (Currently may 2021 SR3). Effectively those are 2 different products. If you thought you could just run installers to upgrade to newer version this is not possible.

I guess there is no point discussing more at the moment as I think you may need to go through documentation and plan what you want to do first.

cheers

Lech

Re: Qlikview Nprinting 16.2 migration to 19+

dhavalp7 — Tue, 28 Dec 2021 09:52:57 GMT

Thank you for the response @Lech_Miszkiewicz

I was referring to the same articles as you mention.

As migration is not possible from 16.2 to 19+ we would have to create all the Nprinting reports from scratch in the newer version. I'm aware that the migration tool is available only from the 16.3 version only.

I have doubts related to the Qlikview upgrade. For instance, let say we upgraded the Nprinting designer & Engine to 19+, do we need to upgrade the Qlikview & Qlikview Server as well? As per Qlik Nprinting Engine System Requirement Supported Qlikview versions are

QlikView May 2021 (12.60) or higher
QlikView April 2020 SR2 (12.50 SR2) or later
QlikView April 2019 (12.40) or higher

Currently, we're using Qlikview 11.20 SR8. So do we need to upgrade the Qlikview & Qlikview Server as well?

Thanks in advance 🙂

Re: Qlikview Nprinting 16.2 migration to 19+

Lech_Miszkiewicz — Tue, 28 Dec 2021 10:22:51 GMT

Yes, correct - you will need to upgrade QlikView to whatever version is listed on help page as supported.
Other versions may work, bit from my experience there are always issues with unsupported configurations.

in your situation i would go for the latest possible versions so you would get most up to date versions which will be supported for next few years.

cheers

Re: Qlikview Nprinting 16.2 migration to 19+

dhavalp7 — Tue, 28 Dec 2021 10:28:43 GMT

Thanks, @Lech_Miszkiewicz I also think so.

Re: Qlikview Nprinting 16.2 migration to 19+

Lech_Miszkiewicz — Tue, 28 Dec 2021 10:32:30 GMT

By the way.
you may consider upgrading to Nprinting 16.3 at least or latest possible Nprinting 16 version so you could utilise migration tool if you think it could be possible