topic Re: Error : Nprinting Server Engine X - The QlikView Server is reachable. in Qlik NPrinting

Error : Nprinting Server Engine X - The QlikView Server is reachable.

qwebnm — Fri, 15 Nov 2024 21:34:45 GMT

Dear QlikTech,
I have a severe issue with NPrinting resulting in report generation failures.

I tried to solve the problem by restarting the QlikView Server service on QlikView Server, but unsuccessful.

After restarting QlikView server and NP server, it worked normally.
However, we are trying to figure out the cause of this issue.
I've looked at the event logs app, security, system, but I don't think there's anything that could be a problem.
Qlik masters!
How can I determine the cause of this problem?

Can you look at the logs I sent you and tell me what the cause is?
If you need more detailed information, please let me know.

Thanks & Regards.

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

Lech_Miszkiewicz — Fri, 26 May 2023 04:01:22 GMT

Hi @qwebnm

hard one to diagnose - The error you see in connection verification suggests there was issue when trying to communicate from NPrinting to QV. Hard to know from logs what happened. It could be closed port, network issue, account issue etc.. At the time of the issue I would normally RDP to NPrinting as NPrinting service account user and I would try "open in the server" from QV Desktop client the app on QV server. I assume at that time it would not connect indicating some network issues.

post factum is quite hard to troubleshoot those.

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

Ruggero_Piccoli — Fri, 26 May 2023 07:29:19 GMT

Hi,

In the Engine logs there are Authentication Failed errors. Follow @Lech_Miszkiewicz 's suggestion and login via RDP in the Qlik NPrinting server with the Windows user that runs the Engine service ahd try to open the document on QlikView server with the local QlikView Desktop. As an alternative check the QlikView server configuration to be sure the Windows user running the Engine services have the rights to open the documents.

Best Regards,

Ruggero

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

Frank_S — Fri, 26 May 2023 15:12:39 GMT

@qwebnm

In addition to the diagnostic points mentioned by Ruggero and Lech,

I see a number of possible issues here

Is the QlikView server SZE00031 a member of the same domain as your user account hanonsystems\qview? Or is it in a different domain or possibly a stand alone server computer (not a member of a domain)? Please note that the NPrinting, QlikView servers and services accounts used should be part of the same domain.
Are you sharing the QlikView services service account with the NPrinting engine service? (If yes, then you need to know that you must have a dedicated NPrinting service account for each NPrinting engine. Dedicated NPrinting Server & Engine Service Accoun... - Qlik Community - 1716056
Is the account hanonsystems\qview part of the load script? To construct your QVW load script, check out this article https://community.qlik.com/t5/Official-Support-Articles/NPrinting-Reports-Tasks-and-Connections-that-use-Section-Access/ta-p/1832996
If there is actually no section access in the QVW, then you may uncheck the 'connection requires authentication' check box.
Check that you have no unsupported items especially any document on open triggers in this case. (Unsupported QlikView Document item... - Qlik Community - 1714896)

Kind regards...

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

qwebnm — Tue, 30 May 2023 07:22:08 GMT

Thank you so much for your answer.

But, I didn't quite understand.

* Method 1
1. Log in to the QlikView server SZE00031 with the hanosystems\qview account from the Qlik NPrinting server to Remote Desktop.
2. Attempting to open a document on QlikView server (SZE00031) by launching QlikView Desktop on QlikView server SZE00031.
Are you saying to do things in the order above?

* Method 2
- Make sure the Windows user has permission to open the document
Which document should be checked to check the permission to open the document of the hanosystems\qview account?

Please reply if possible.

thank you

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

Lech_Miszkiewicz — Tue, 30 May 2023 08:10:07 GMT

Hi @qwebnm ,

no you misunderstood us. You need to:

RDP to NPrinting Engine Server as NPrinting service account
- Once there open QlikView desktop and use "Open in server" (see screenshot) and open document you would use for your NPrinting report. That method would then allow you to see what is happening as NPrinting would do the same thing when trying to generate report.
Permissions on document are on the qvw file used to generate your NPrinting reports. If first step is successful you dont need to worry about it anyway

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

David_Friend — Tue, 30 May 2023 14:27:38 GMT

@qwebnm according to those log files you are on Qlikview 12.10, please confirm?

Please reference QlikView support lifecycle to see if your platform is still supported by Qlik:
https://community.qlik.com/t5/Product-Lifecycle/QlikView-Product-Lifecycle/ta-p/1826339

Also they indicate Nprinting 18.9 (April 2018), according to:
https://community.qlik.com/t5/Product-Lifecycle/Qlik-NPrinting-Product-Lifecycle/ta-p/1826342

that version was no longer supported back in 2020.

Once you have upgraded to supported versions, you can receive technical support (via opening a case) with Qlik, until then posting here on Community is your best avenue for getting help, thanks!

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

qwebnm — Wed, 31 May 2023 02:07:07 GMT

1. When I checked, I think the qview account is configured in the same domain in the group but not in the user.
Is the part I checked correct? If it is incorrect, I would appreciate it if you could tell me in detail which part to check.
Also, it would be appreciated if you could refer to the captured data from 1 to 1-3.

2. Qv service account and NP service account are different.
Where can I confirm that it is being shared?

3. It is not part of the load script.

4. I didn't understand. can you tell me in detail?

5. Where can I check if the document is in an open trigger?
I can't speak English, so I'll ask through a translator.
I am having trouble viewing the video.

Please reply if possible.

thank you!

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

Frank_S — Fri, 02 Jun 2023 15:19:17 GMT

To Check for unsupported items, follow the article I shared earlier. Here it is again. Read (watch) this and follow from end to end.

Check that you have no unsupported items especially any document on open triggers in this case.

(Unsupported QlikView Document item... - Qlik Community - 1714896)

To determine if hamonsystems\qview is a shared user account, you need to check the windows services console on the QlikView server. Then check the windows services panel on the NPrinting server and compare

If the NP services and QV services are using the same services account then this is 'shared' service account situation.

If you do need to change the service account on the NP server, see this help page.

https://help.qlik.com/en-US/nprinting/May2023/Content/NPrinting/DeployingQVNprinting/User-accounts.htm#anchor-1

Only change domain account for these NP services

NP audit
NP engine
NP web engine
NP scheduler services

It looks like you already have a user account hamonsystems\QNPrinting that is already a member of the local administrators group so you can use that.
But once you change the service account, you will need to log into the NP server as the new np service user account and do the

File>open in server to retrieve a cal from your Qlikview server as the new NP service account.

If you have not assigned a CAL to this QNPrinting user, then follow the steps in the article also provided above to manually assign a CAL.

https://community.qlik.com/t5/Support-Knowledge-Base/Dedicated-NPrinting-Server-amp-Engine-Service-Account/ta-p/1716056

Kind regards...

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

qwebnm — Thu, 22 Jun 2023 06:02:49 GMT

Thank you for your response. I have reviewed the link you provided.

I came across the link that instructed to check for unsupported items.
(https://community.qlik.com/t5/Official-Support-Articles/Qlik-NPrinting-Unsupported-QlikView-Document-items-System/ta-p/1714896)
The article mentioned version details, and the current version being used by the company is 18.9.5, which is higher than the versions mentioned in the article:
"Below QlikView document items are NOT supported in NPrinting 16 or NPrinting 17+ platforms."

Does this version also relate to the link you provided?

If possible, I kindly request your response.

Thank you.

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

qwebnm — Thu, 22 Jun 2023 06:16:48 GMT

As you mentioned, I successfully connected to the QlikView server's app by attempting to "Open on Server" using the NP server service account through RDP connection, and the connection screen appeared as shown in the attached image.

Could this indicate that the issue is not related to the connection itself? Are there any other possible causes for the problem?

If possible, I kindly request your response.

Thank you.

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

qwebnm — Thu, 22 Jun 2023 06:18:25 GMT

As I mentioned earlier to the other person as well,

Could this indicate that the issue is not related to the connection itself? Are there any other possible causes for the problem?

If possible, I kindly request your response.

Thank you.

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

qwebnm — Thu, 22 Jun 2023 06:22:32 GMT

@Lech_Miszkiewicz @Ruggero_Piccoli

Thank you to all the Qlik experts who provided the responses. I appreciate your assistance.

Could this indicate that the issue is not related to the connection itself? Are there any other possible causes for the problem?

If possible, I kindly request your response.

Thank you.

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

qwebnm — Thu, 22 Jun 2023 06:26:04 GMT

Thank you for your assistance.

I am already aware of the product's support lifecycle and I am currently preparing for the upgrade process. I intend to proceed with the upgrade as soon as possible. However, I encountered these issues before the upgrade and I am currently in the process of investigating and resolving them.

I kindly request the assistance of the esteemed Qlik experts in order to resolve these issues.

Thank you.

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

Frank_S — Fri, 23 Jun 2023 18:30:59 GMT

@qwebnm
If you haven't already done so, please start a support case.

In the meantime, please check these points.

It could be a CAL issue.

1 Suggest to manually assign a CAL to the NP service account as per Dedicated NPrinting Server & Engine Service Accoun... - Qlik Community - 1716056

Manual assignment steps can be found therein. This issue may be related to a dynamically assigned.

2. If you have multiple QVS's, ensure the NP service account is part of each QV Administrators group on each QVS.

3. Do a file/open in server as the NP service account to ensure the NP service user has access to each QVW. The point is that if Qlik publisher exists in your environment, the NP service account should be a distribution recipient for each QVW.

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

Lech_Miszkiewicz — Sat, 24 Jun 2023 02:05:44 GMT

Hi @Frank_S & @qwebnm

@qwebnm - is this ongoing issue? or was it only one off in the past. A lot of test we are asking you to do have to be done at the time when you faced the issue. If you are doing them now when everything is back to normal then there is no point. You should have done those test when you experience the problem

Judging by this conversation I think you are just trying to pinpoint what had happened back then in the past when your tasks did not work. If that issue hasn't happened since then there is no point dragging this topic for much longer.

On the other hand if it happens again - only then perform all the tests we mentioned as only then you may be able to capture the cause.

I tried to go through all comments in this topic and it seems like never ending story and we dont even know what we are looking for. In your initial post you mentioned that after rebooting machines everything went back to normal so the question I have is if the issue is still persisting?

cheers

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

qwebnm — Mon, 26 Jun 2023 06:13:03 GMT

Thank you for your reply! Here are the answers to the points you mentioned. If possible, I would appreciate it if you could confirm them.

CAL has already been manually assigned to the NP service account. If it appears as shown in the picture below, does it mean that it has been manually assigned?
Yes, I belong to the administrator group. Please refer to the screenshot below.
With the NP service account, I can open files on the server.

Are there any other issues I should be aware of?

If possible, I would appreciate a guide.

Thank you, Qlik expert, for always providing assistance.

Stay healthy!

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

qwebnm — Mon, 26 Jun 2023 06:22:55 GMT

Thank you for your response.

We experienced another outage due to the same issue after that.

Once again, we had to restart the server to restore normal functionality.

As the problem persists, we would like to identify the root cause and find a resolution.

If you can provide any assistance, we would greatly appreciate it.

We are always grateful for your support.

Re: Error : Nprinting Server Engine X - The QlikView Server is reachable.

Lech_Miszkiewicz — Mon, 26 Jun 2023 09:47:00 GMT

Hi @qwebnm

again - you have restarted the server.....

next time before you restart - please perform all the tests we mentioned here as only then you can replicate the problem and gather some information.

Fact that restart helps can be related to problems outside of the NPrinting itself (like network, domain controller, account locking out etc).