topic Re: Qlik sense 1.0.2 Multi-node not working in Management & Governance

Qlik sense 1.0.2 Multi-node not working

josecardenas — Fri, 06 Feb 2015 12:53:46 GMT

Hi everyone

I've created a new node as slave in order to link to the master on Qlik Sense (Version 1.0.2). Although I've followed all possible advice on the manuals and on the internet and in the qlik community, I've not getting to work properly. I' ve already installed 3 times the qlik sense on the slave machine and it's not working at all and I'm getting mad!

I've tracked the logs and ports before and after the installation, and before and after adding the new node, and I've noticed that the port 5151 for some reason is not opening and this one is needed to communicate the schedulers between the master and slave:

https://help.qlik.com/sense/en-us/developer/Subsystems/Qlik_Sense_Repository_Service_API/Content/QRS%20API/Repository_REST_API_Architecture_Default_Port_Numbers.htm

've checked The log on the repository (slave server) and I've got the ERROR below:

41	20150206T120204.625+0000	INFO	WIN-HOSTNAME	System.Repository.Repository.QRSMain	2416	01f5849e-be97-4d82-87ea-a4b605a14297	WIN-HOSTNAME\sense_system	Startup phase completed	01f5849e-be97-4d82-87ea-a4b605a14297
42	20150206T120238.496+0000	ERROR	WIN-HOSTNAME	System.Repository.Repository.Core.Status.ServiceStatusPoller	3352	fa5db67a-90e1-4b15-8fe4-af6cb7ccac21	WIN-HOSTNAME\sense_system	Error when requesting service alive response from 'https://WIN-HOSTNAME:5151/qss/'. Unable to connect to the remote server	fa5db67a-90e1-4b15-8fe4-af6cb7ccac21
43	20150206T120253.348+0000	ERROR	WIN-HOSTNAME	System.Repository.Repository.Core.Status.ServiceStatusPoller	3352	2479368c-6b1a-45b2-ba62-36ae75778431	WIN-HOSTNAME\sense_system	Error when requesting service alive response from 'https://WIN-HOSTNAME:5151/qss/'. Unable to connect to the remote server	2479368c-6b1a-45b2-ba62-36ae75778431

The list of ports opened in the slave:

Proto Local Address Foreign Address State

TCP 0.0.0.0:135 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:445 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:3389 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:4242 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:4444 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:5985 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:47001 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49152 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49153 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49154 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49155 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49156 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49157 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49158 WIN-HOSTNAME:0 LISTENING

TCP 127.0.0.1:4432 WIN-HOSTNAME:0 LISTENING

TCP 127.0.0.1:4432 WIN-HOSTNAME:51111 ESTABLISHED

TCP 127.0.0.1:51111 WIN-HOSTNAME:4432 ESTABLISHED

TCP xxx.xxx.x.x:139 WIN-HOSTNAME:0 LISTENING

TCP xxx.xxx.x.x:3389 yyy.yyy.y.y:57694 ESTABLISHED

TCP xxx.xxx.x.x:3389 yyy.yyy.y.y:58255 ESTABLISHED

I've checked The log on the scheduler (slave server) and I've got the ERROR below:

2	20150206T121129.133+0000	INFO	WIN-HOSTNAME	System.Scheduler.Scheduler.Core.Utility.CommonInitializer	2360	d6634f2e-4cd2-47bc-8f53-bcc61c6e1ccb	WIN-HOSTNAME\sense_system	Running common startup sequence	d6634f2e-4cd2-47bc-8f53-bcc61c6e1ccb
3	20150206T121130.367+0000	ERROR	WIN-HOSTNAME	System.Scheduler.Scheduler.Communication.Wrapper.Repository.RepositoryWrapper	2360	6072438a-dbb8-42fb-ae8e-27e0b6fb833f	WIN-HOSTNAME\sense_system	Exception message from RestResponse: The remote server returned an error: (404) Not Found.	6072438a-dbb8-42fb-ae8e-27e0b6fb833f
4	20150206T121130.852+0000	ERROR	WIN-HOSTNAME	System.Scheduler.Scheduler.Communication.Wrapper.Repository.RepositoryWrapper	2360	a55049b3-bf09-4bbd-9416-9454209e3856	WIN-HOSTNAME\sense_system	Exception message from RestResponse: The remote server returned an error: (404) Not Found.	a55049b3-bf09-4bbd-9416-9454209e3856
5	20150206T121131.070+0000	ERROR	WIN-HOSTNAME	System.Scheduler.Scheduler.Communication.Wrapper.Repository.RepositoryWrapper	2360	fba02bec-5009-4a59-bcb9-152dd7057c68	WIN-HOSTNAME\sense_system	Exception message from RestResponse: The underlying connection was closed: An unexpected error occurred on a send. -> Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. -> An existing connection was forcibly closed by the remote host

108	20150206T121600.751+0000	ERROR	WIN-HOSTNAME	System.Scheduler.Scheduler.Communication.Wrapper.Repository.RepositoryWrapper	2360	3c0a7052-4e6d-4fe4-a2b6-9ce8da865e7b	WIN-HOSTNAME\sense_system	Exception message from RestResponse: The remote server returned an error: (403) Forbidden.	3c0a7052-4e6d-4fe4-a2b6-9ce8da865e7b
109	20150206T121605.794+0000	ERROR	WIN-HOSTNAME	System.Scheduler.Scheduler.Communication.Wrapper.Repository.RepositoryWrapper	2360	115be77c-cab2-4aef-95c9-669bda18d824	WIN-HOSTNAME\sense_system	Exception message from RestResponse: The remote server returned an error: (403) Forbidden.	115be77c-cab2-4aef-95c9-669bda18d824
110	20150206T121610.810+0000	ERROR	WIN-HOSTNAME	System.Scheduler.Scheduler.Communication.Wrapper.Repository.RepositoryWrapper	2360	b03350ff-a6c8-49f3-ace4-87c09ea1d971	WIN-HOSTNAME\sense_system	Exception message from RestResponse: The remote server returned an error: (403) Forbidden.	b03350ff-a6c8-49f3-ace4-87c09ea1d971

I've checked the windows event log and I'm getting many times the same error from PostgreSQL database. Here a sample:

The description for Event ID 0 from source PostgreSQL cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

ERROR: column c.CreatedOn does not exist at character 10

STATEMENT: SELECT

c."CreatedOn"

FROM "__MigrationHistory" AS c

LIMIT 1

So … from this point I've just gave up, trying to find another alternative to the issue.

Any HELP and possible solution is really appreciated!

Thanks everybody

Jose.

Re: Qlik sense 1.0.2 Multi-node not working

Masaki_Hamano — Sat, 07 Feb 2015 12:21:16 GMT

Hi Jose,

Port 4241 is missing in your list of opened port in the slave node. The port is used for QRS synchronization in multi-node sites.

Masaki

Re: Qlik sense 1.0.2 Multi-node not working

josecardenas — Mon, 09 Feb 2015 12:25:57 GMT

Hi Masaki.

Really weird!

I've installing for 5th time to check what's happening with the ports!

Once is installed (before links as slave server) the open ports list is you find below:

Proto Local Address Foreign Address State

TCP 0.0.0.0:135 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:445 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:3389 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:4444 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:4570 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:5985 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:47001 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49152 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49153 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49154 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49155 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49156 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49157 WIN-HOSTNAME:0 LISTENING

TCP 0.0.0.0:49158 WIN-HOSTNAME:0 LISTENING

TCP 127.0.0.1:4432 WIN-HOSTNAME:0 LISTENING

TCP 127.0.0.1:4432 WIN-HOSTNAME:49170 ESTABLISHED

TCP 127.0.0.1:4444 WIN-HOSTNAME:49188 ESTABLISHED

TCP 127.0.0.1:49170 WIN-HOSTNAME:4432 ESTABLISHED

TCP 127.0.0.1:49188 WIN-HOSTNAME:4444 ESTABLISHED

TCP 192.168.0.5:139 WIN-HOSTNAME:0 LISTENING

TCP 192.168.0.5:3389 192.168.0.4:62072 ESTABLISHED

192.168.0.5 is the master server and 192.168.0.4 is the slave one (internal address)

I think the ports are open on the server once you register the slave on the master. But for some reason it's not working!

Jose

Re: Qlik sense 1.0.2 Multi-node not working

Masaki_Hamano — Tue, 10 Feb 2015 14:10:23 GMT

Hi Jose,

It is hard to identify in which step you got stuck and where the issue lies in your environment, so I quickly documented the steps I followed to build a multi-node environment successfully. I attached the file in the following URL, so please refer to it (Please make sure that the all necessary port is open, and that the master and slave node can communicated with the host name specified while installation.):

Qlik Sense Multi-node Setup Guide

I hope it helps.

Masaki

Re: Qlik sense 1.0.2 Multi-node not working

Ricardo_Gerhard — Thu, 12 Feb 2015 12:10:11 GMT

Hi Masaki,

Thanks for this document. I´ve a questions.

What I need to configure in "Web socket origin white list"? Only add the RIM server in Central Node?

How I simulate a user access in this multiple nodes?

Where I see what server this user is using?

Re: Qlik sense 1.0.2 Multi-node not working

Masaki_Hamano — Fri, 13 Feb 2015 00:53:36 GMT

Hi Ricardo,

Thank you for your question. You need to add machine addresses to "Web socket origin white list", with which users access to the server. So, for instance, if users access to the added rim node with "rim1.example.com", you need to add it to the white list. Or if users access to it through a network load balancer ("nlb.example.com") placed in front of the configured nodes, you add it to the list. You can independently set a white list for each proxy node, so the same idea applies to other rim nodes and the central node, too.

It is also possible to configure a proxy server as an load balancing node by adding multiple engine node entries to "load balancing node" in proxy setting. In this configuration, user accesses to the proxy node are distributed among registered engine nodes. The same idea applies to this case: you need to add the machine address of the proxy rim node to the white list.

Masaki

Re: Qlik sense 1.0.2 Multi-node not working

Ricardo_Gerhard — Fri, 13 Feb 2015 11:19:28 GMT

Thanks Masaky,

So, How I simulate a user access in this multiple nodes?

Example: USER1 access QPS (webserver) on SERVER1 and open APPX, that have two QES (server1 and server2).

How I guarantee that user1 is opening the appx in this two server?

Like a Qlikvew Server, I want to know how connections are openning in this CLUSTER.

Re: Qlik sense 1.0.2 Multi-node not working

Masaki_Hamano — Mon, 16 Feb 2015 04:40:44 GMT

Hi Richardo,

The load balancing module handles which QES handles a session, and it is logged in Audit log of QPS. So, when there are multiple QES nodes under a QPS, you can identify which QES is actually handling a session by checking the log.

Regards,

Masaki

Re: Qlik sense 1.0.2 Multi-node not working

josecardenas — Mon, 16 Feb 2015 09:37:50 GMT

Hi Masaki and Ricardo

Both of you have many helpful questions and answers, however I think we've diverted just a bit the original post. After all, the q&a set has been very helpful for my future nodes creation.

I want to tell you that the slaver node right now is working. The main issue was solved and it was the communication between the machines wasn't taken by qlik. In order to work the machines dns names must be declared on the host of every machine and the certificates must be created in the same way (with dns).

Roughly the solutions explained below:

Install the rim node and when the service credentials is requested use the machine name
Place the dns name of the central server on the hosts file on the rim node
Place the dns name of the rim server on the hosts file on the central node
Be sure the domains name are on the same domain on but machines (p.e xxxx.domain.com for the central node and yyyy.domain.com for the rim node)
Add the rim node on the qmc application on the central node.
When add the rim node place the full domain name of the rim node (yyyy.domain.com)
After this follow the normal steps in order to authorize the rim node.

Last but no least the key point is with the certificates. The final result of the certificates must be:

Issued to the yyyy.domain.com (rim node)
Trusted certification authority must be xxxx.domain.com (central node)

Jose

PD: Thanks Masaki for your guide; and Ricardo thanks for your questions that could be helpful in my feature nodes creation.

Re: Qlik sense 1.0.2 Multi-node not working

Masaki_Hamano — Mon, 16 Feb 2015 09:53:11 GMT

Hi Jose,

Thank you for your feedback. I am glad that you have successfully made it work

Masaki

Re: Qlik sense 1.0.2 Multi-node not working

tseebach — Sun, 20 Sep 2015 12:54:49 GMT

Hi Jose,

I've had pretty much a similar experience. I needed to add the exact hostnames to ip translation in hosts file. Also I did the following:

When uninstalling in order to correctly install, remember to remove Certificates
When asked about the hostname of the central server, enter the name that you put into your hostfile
Remember to set a password on the Central Repository

In contract to QlikView it seems that when install a Sense Cluster you need to get right install setting in place. These cannot be changed afterwards.

Re: Qlik sense 1.0.2 Multi-node not working

microland — Fri, 26 Apr 2019 06:44:10 GMT

Hi Amo,

I have done a new setup with November 2018 version. I am facing the issue while adding RIM that error says

"Cannot reach the following remote host when distributing certificates: http://nodename:4444/setup/certificateDistribution"

Atleast 5-6 times i dropped the Azure VM and started fresh installation and still it is giving the same error.

After that, i took 2 new VMs and installed Feb 2018 version with the same procedure and it is working fine.

Is there any issue with November 2018 version in installing RIM node?

Is there any specific setup needs to be done for Nov 2018?

Any help/ inputs would be really helpful.