article Qlik NPrinting Designer cannot find a supported reporting template editor in Official Support Articles

Qlik NPrinting Designer cannot find a supported reporting template editor

Frank_S — Thu, 06 Feb 2025 11:22:58 GMT

The following error is displayed when opening the Qlik NPrinting Template Editor:

Qlik NPrinting can't find a supported template editor for the file .... the object reference is not defined as an instance of an object.

This error can be caused by a number of different root causes. We will be covering the most frequent issues and their solutions in this article.

Before proceeding to Root Causes and Solutions, please review the NPrinting Designer system requirements

NPrinting Designer System Requirements

Note: Are you having trouble repairing or uninstalling MS Office? Please see the attached help article from Microsoft: "Microsoft Support and Recovery Assistant"

Root Causes and Solutions

Root Cause: Qlik NPrinting Designer requirements are not met.

Solution:

Verify that your setup meets the system requirements. See System requirements for Qlik NPrinting Designer for details.

NOTE: Virtualized desktops where NPrinting is installed are not supported ie: Citrix deployments

NOTE: You must be using a locally installed copy of MS office. Web-based versions are not supported. See: Is Office 365 supported in Nprinting Designer, and are there any known issues or incompatibilities?

Root cause: Operating System Resolution settings and Desktop Settings

Your Operating System Advanced Scaling/r=Resolution settings are not set to 100 percent or other resolution-related settings need to be adjusted.

Solution

Review NPrinting Designer Preview Fails, Does not open or template editor problems and follow all the suggested solutions.

Root Cause: Outdated Qlik NPrinting Server, Engine, and Designer

Solution:

Verify that your Qlik NPrinting installation is up to date and that the Designer, Server, and Engine are all on the same version. Always keep your Qlik NPrinting setup up to date.

Root Cause: Microsoft Office is not correctly installed or not correctly associated.

Solution:

Verify that Microsoft Office can be opened on the machine running the Qlik NPrinting Designer. In case any Office extension is not associated with the right program, please, follow this article to fix the issue.

Root Cause: Microsoft Office and Windows Update

A Microsoft Office Update in 2021 has led to compatibility issues. These were resolved as per Qlik's Internal defect ID OP-95579.

See this article's appendix for additional details.

Solution:

The fix on Qlik's end was originally introduced in May 2021 SR3 (Release Notes). If you are on a version prior to this, upgrade to the latest version of Qlik NPrinting.

Root Cause: Faulty or corrupted installation of MS Office or Qlik NPrinting

Solution

Repair the Microsoft Office Installation.
Restart.

If this does not resolve the issue:

Uninstall the Qlik NPrinting Designer
Download the Qlik NPrinting Designer software version that matches the identical version of your Qlik NPrinting Server
Uninstall Microsoft Office
Restart
Reinstall Microsoft Office and then NPrinting Designer
Reboot

Root Cause: Incorrect Office registry keys

Solution

Follow this article.

Root Cause: Missing or incorrect registry keys for embedding

Solution

Follow this Article.

Root Cause: Anti Virus software is interfering.

Solution

See Qlik NPrinting Server and Designer Anti Virus Folder Exclusions.

Root Cause: Unsupported setup

Verify that the Qlik NPrinting Designer installation requirements are met, including .NET requirements.
Install a local copy supported copy of MS office. Do NOT install a web-based version of MS Office. This is not supported. Is Office 365 supported in Nprinting Designer, and are there any known issues or incompatibilities? Virtualized (Citrix) and or cloud versions of MS Office are not supported by any versions of NPrinting.
Verify that Microsoft Office is correctly licensed.

Solution

Modify your setup to match the system requirements.
Install a supported copy of Microsoft Office and license it.
Install the NPrinting Designer.

Alternative Solution if the previous one does not work

Complete removal of Microsoft Office & NPrinting designer
USE THIS FOLLOWING STEP WITH CAUTION BEFORE PROCEEDING: once the removal is completed, delete and recreate the Windows user profile of the windows account (save all desktop files, document folder data, public folder data, and documents folder data before proceeding with this option.
Once the new profile is created, install a supported version of MS Office and NP designer then reboot and retest.

NOTE: Deleting a windows user profile from your computer will result in the loss of all files and folders associated with this user profile deletion. Ensure to backup desktop profile files and folders before proceeding

Root Cause: Insufficient Account Privileges

The Qlik NPrinting Designer is installed with an account that has insufficient installation privileges.

Solution

See Dedicated NPrinting Service Account Configuration.

Root Cause: The Qlik NPrinting Designer is not installed on C:\ Drive

The Qlik NPrinting Designer must be installed on the C:\Drive

Solution

Reinstall Qlik NPrinting Designer on the c:\ drive

Root Cause: MS Office 32 bit versions

Use MS office 64 versions where possible

Solution

See : Qlik NPrinting cannot find a supported template editor with Error: Object reference not set to an instance of an object

Appendix

NOTE Dec. 21, 2021:

May 2021 SR 3 NPrinting is now available for download
Please upgrade all NPrinting Components to resolve this issue including:
- NP Server, NP Designer and NP Engine (NP On Demand components if applicable to a QlikView environment).
If the issue is not resolved by upgrading, please proceed to the section below "If this MS Office update problem is not your issue, then please proceed below"
Release Notes May 2021 SR 3 (see defect ID OP-95579 - in Resolved Defects section): https://community.qlik.com/t5/Release-Notes/Qlik-NPrinting-May-2021-SR3/ta-p/1872634#toc-hId--1646366854
Recommend upgrading to the most recent version of NPrinting however to leverage all current fixes and updates

NOTE Oct. 7, 2021:

This error is recently been caused specifically by an MS Excel version upgrade/windows update
This issue has been found thus far in the following MS Excel builds
- version 2109 (Build 16.0.14430.20224) 64 bit
- version 2109 (Build 16.0.14430.20270)
Current workaround is to
1. Repair: Perform a full MS Office Online Repair operation or...
2. Roll Back to your previous version of MS office
3. If using Office 20219 v2109 perform the steps in the following article:
  - https://community.qlik.com/t5/Qlik-NPrinting-Documents/Qlik-NPrinting-Designer-cannot-find-a-supported-template-editor/ta-p/1861060
A fix for this MS Office update issue is implemented in May 2021 SR 3 NPrinting
For latest updates visit:
- https://community.qlik.com/t5/Support-Updates-Blog/NPrinting-Designer-Issue/ba-p/1846432
- https://community.qlik.com/t5/Qlik-NPrinting-Discussions/Qlik-NPrinting-Designer-can-t-find-a-supported-template-editor/td-p/1844229

Re: Qlik NPrinting can't find supported reporting template editor

RajaDumpa — Thu, 07 Oct 2021 18:56:30 GMT

Hi Frank,

Based on our call, the issue is resolved in our scenario post performing an 'Online repair " of the MS Office 365. After rebooting the server , it didn't fix the issue right away but later part of the day, when we logged in , MS office prompted for login credentials and it was fixed as seen below.

The template had some error, but when closed and opened, it worked just fine.

Re: Qlik NPrinting can't find supported reporting template editor

sheavero — Wed, 13 Oct 2021 13:32:21 GMT

Hi All,

We have performed a repair of MS Office 365, but the error is still appearing when attempting to open the template editor. It is not recommended that we roll back as the update policy for Microsoft is company wide. Any recommendations?

Re: Qlik NPrinting can't find supported reporting template editor

RajaDumpa — Wed, 13 Oct 2021 13:44:39 GMT

@sheavero : I can understand the difficulty of rolling back Group Policy as most organizations don't support that. One other option that I can think of is to Un-install Office 365 and re-install a MS office 2010, 2012, or 2016 standalone versions.

@Frank_S : Frank, can you advice if a client's N-Printing server/ Designer versions (> 2020 or 2021) can support standalone MS Office Versions ? Will they effect the current excel templates that were designed via Office 365 versions ?

Re: Qlik NPrinting can't find supported reporting template editor

mikedeee — Thu, 14 Oct 2021 12:51:21 GMT

Just checking to see if there is an ETA for a permanent fix on the October 7 bug as we have had one user causualty caused by an Office 365 reinstall.

Our corporate security does not allow falling back Office 365 versions without moving mountains and stand alone versions are also locked out completely. We don't have repair available, only reinstall, which only comes in the form of the newest version of Office 365.

Our path must be be nPrinting and nPrinting Designer upgrades, but that one will need a Qlik heads up on possible issues brought on by that process.

Re: Qlik NPrinting can't find supported reporting template editor

SHurleySteward — Thu, 14 Oct 2021 12:57:52 GMT

I am also in the same situation of being unable to roll back my Office 365 installation nor install a different version of Excel. An ETA for a fix would be helpful.

Re: Qlik NPrinting can't find supported reporting template editor

Ryan_Lessig — Thu, 14 Oct 2021 16:32:33 GMT

I have the same situation related to the Oct 7 bug. We cannot roll back O365 or install stand alone versions per company policy.

Re: Qlik NPrinting can't find supported reporting template editor

RajaDumpa — Thu, 14 Oct 2021 20:13:45 GMT

Hi All,

Please try with Un-installing N print Designer and re-install and perform Full repair of the MS office 365 and re-boot the machine. This solved our issue.

If you cannot repair, try asking for a one-off case permission from your Cloud Windows teams to enable that feature. Without a repair, there is no possible solution.

Re: Qlik NPrinting can't find supported reporting template editor

andregas — Wed, 20 Oct 2021 14:03:37 GMT

Hello All,

In my case helped the following actions:

https://community.qlik.com/t5/Knowledge/Qlik-NPrinting-can-t-find-a-supported-template-editor-for-the/ta-p/1712807 --> pay attention to use your paths, don't copy them from the guide but define them from your version and architecture of installed Office.
Set Windows resize screen at 100%.
Open Regedit and delete the key "Options" from [HKEY_CURRENT_USER\Software\Microsoft\Office\<version>\<application>\] where application could be Word, Excel or PowerPoint (the three Office programs used by NP Designer) and version is the number version of your Office (e.g. 15.0 is Office 2013, 16.0 is Office 2016, etc...)

For the last point if you find the value "RenderForMonitorDpi" try to delete it instead to delete the entire key, otherwise I suggest to delete the key.

Let me know if it helped.

Re: Qlik NPrinting can't find supported reporting template editor

SHurleySteward — Thu, 21 Oct 2021 16:08:35 GMT

Still can't repair and am trying to get our company to roll us back to an earlier version of 365 MSO. In the meantime, our IT department has started to push 365 MSO Version 2109 Build 16.0.14430.20292 - 64-bit. This still causes the NPrinting template error. This problem will only get worse for us as more developers are forced onto the newer version of 365 MSO.

Re: Qlik NPrinting can't find supported reporting template editor

Ruggero_Piccoli — Thu, 18 Nov 2021 15:13:29 GMT

Hi,

Check the article with the suggested settings that solve in many cases https://community.qlik.com/t5/Qlik-NPrinting-Documents/Qlik-NPrinting-Designer-cannot-find-a-supported-template-editor/ta-p/1861060

Best Regards,

Ruggero

Re: Qlik NPrinting can't find supported reporting template editor

astyanax — Mon, 20 Dec 2021 12:12:38 GMT

Hi,

Thanks for your help. I never received any update myself. So I guess the case can be closed. If not, I will create a new one, or better: give the instructions hoe to create a case to the people involved.

Cheers,

Patricia

Re: Qlik NPrinting can't find supported reporting template editor

micsim123 — Fri, 08 Apr 2022 11:23:28 GMT

Hi,

Thank you for all the creative suggestions for solving this problem, which have not been resolved yet. I wonder if the problem is the Nprinting Designer itself. And that Qlik should sacrifice some attention to make this product work in a normal windows office 365 environment.

Best

Michael

Re: Qlik NPrinting can't find supported reporting template editor

Ruggero_Piccoli — Fri, 08 Apr 2022 13:56:09 GMT

Hi @micsim123

The issue with some recent versions of Microsoft Office 365 is solved starting from Qlik NPrinting May 2021 SR3. With older versions of Qlik NPrinting you can manually apply the same settings of May 2021 SR3.

It is documented in my article at https://community.qlik.com/t5/Qlik-NPrinting-Discussions/Qlik-NPrinting-Designer-can-t-find-a-supported-template-editor/td-p/1844229 and in the May 2021 SR3 Release Notes at https://community.qlik.com/t5/Release-Notes/Qlik-NPrinting-May-2021-SR3/ta-p/1872634

Be also sure that you are using the Desktop version of Office 365. Web and mobile versions are not supported. https://help.qlik.com/en-US/nprinting/May2021/Content/NPrinting/DeployingQVNprinting/System-requirements_designer.htm

Best Regards,

Ruggero