topic Re: Component tWebServiceInput doesn't run in Talend Studio

Component tWebServiceInput doesn't run

Anonymous — Sat, 16 Nov 2024 13:59:31 GMT

Hello, I have a problem with the invocation of a WebService through TWebServiceInput component.
Version: Talend Open Studio, Version: 3.0.3
Build id: r21383-20090126-2207
I'm trying to run the webservice but doesn't obtain the correct results, another tools to test webservices runs ok. I have attached several images.
Execution ok of the webservice through "http", fich1.jpg
Execution via tWebServiceInput, fich2.jpg (ko)
Design of the Job on Talend 3.0.3, fich3.jpg
Thanks in advance

Re: Component tWebServiceInput doesn't run

Anonymous — Thu, 16 Apr 2009 15:17:01 GMT

Can you post your schema of tWebServiceInput please?

Re: Component tWebServiceInput doesn't run

Anonymous — Sun, 19 Apr 2009 08:50:27 GMT

Yes, of course, here you are.
I have tested with two schemas "exit1" and "exit2" but the results are the same.
The file "exit2.jpg" contains the fields corresponding to the Webservice response.
I have attached too an extract of a document that explains the webservice response and input parameters.
Thanks

Re: Component tWebServiceInput doesn't run

Anonymous — Mon, 20 Apr 2009 04:18:15 GMT

Hello guy
If you return multiple fileds at a time or the result contains complex type, you should use the 'Advanced Use' in Advanced settings tab. see 3814.
Please follow the steps as the screenshots.
Best regards

shong

Re: Component tWebServiceInput doesn't run

Anonymous — Tue, 05 May 2009 18:30:09 GMT

Hello,
I have followed your instructions and i have had to rebuild the generate code by Talend, to obtain right results, the results are ok.
I have now another problem. The parameters that WebService needs as arguments (8 paramters) are included in code (see figure1 and the next code):
*************************
routines.DeydeSoap_PortType DeydeSoap = new routines.Deyde_ServiceLocator().getdeydeSoap();
routines.DeydeSoap_BindingStub stub = (routines.DeydeSoap_BindingStub)DeydeSoap;
java.lang.String param1 = "user";
java.lang.String param2 = "password";
java.lang.String param3 = "mayor 8 28000 madrid";
java.lang.String param4 = "es,dom,cand";
javax.xml.rpc.holders.StringHolder param5 = new javax.xml.rpc.holders.StringHolder("noerror");
javax.xml.rpc.holders.StringHolder param6 = new javax.xml.rpc.holders.StringHolder("");
java.lang.Long paramLong = -1L;
javax.xml.rpc.holders.LongWrapperHolder param7 = new javax.xml.rpc.holders.LongWrapperHolder(paramLong);
javax.xml.rpc.holders.StringHolder param8 = new javax.xml.rpc.holders.StringHolder("");
java.lang.Object[] result = DeydeSoap.deydePlus(param1, param2, param3, param4, param5, param6, param7, param8);

output_row.errorMsg = (String) result;
output_row.candidateList = (String)result;
output_row.selectedCandidate = (Long)result;
output_row.pobVia = (String)result;
output_row.deydePlusResult = (String)result;
*****************************************
But I would like to obtain the input parameters (by code) dynamically through the values of the parameters of the TWebService Component. This component has a prior component (file) that contains several sets of parameters.
For example, "java.lang.String param1 = "entrada_ws.user" is not valid.
Thanks

Re: Component tWebServiceInput doesn't run

Anonymous — Wed, 06 May 2009 04:33:58 GMT

Hello

But I would like to obtain the input parameters (by code) dynamically through the values of the parameters of the TWebService Component.

Yes, we can set the parameters dynamically. Please see my screenshots.
Best regards
shong

Re: Component tWebServiceInput doesn't run

_AnonymousUser — Wed, 09 Jun 2010 16:14:30 GMT

When I follow these steps, I get a "Generate Java files failed. java.io.IOException :" error message when I click the "..." button on the "Advanced Settings" page.
On the "Basic Settings" page I have the following values:
WSDL: " http://192.168.100.80/fsc/fscdav/wsdl?WEBSVC=COO.200.300.1.108119" (my web service, not reachable from outside)
Needs authentication? Yes, provided username + password
Method name: ""
Here is the WSDL:
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:fsc-svc="http://schemas.fabasoft.com/websvc/INVOICE_200_300_InvoicingWebServices/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:stk="http://schemas.microsoft.com/soap-toolkit/wsdl-extension" targetNamespace="http://schemas.fabasoft.com/websvc/INVOICE_200_300_InvoicingWebServices/">
- <wsdl:types>
- <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="http://schemas.fabasoft.com/websvc/INVOICE_200_300_InvoicingWebServices/" xmlns:tns="http://schemas.fabasoft.com/websvc/INVOICE_200_300_InvoicingWebServices/" elementFormDefault="qualified">
- <xs:element name="INVOICE_200_300_GetInvoiceData">
- <xs:complexType>
- <xs:sequence>
<xs:element minOccurs="0" maxOccurs="1" name="invoicenumber" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
- <xs:element name="INVOICE_200_300_GetInvoiceDataResponse">
- <xs:complexType>
- <xs:sequence>
<xs:element minOccurs="0" maxOccurs="1" name="creditor" type="xs:string" />
<xs:element minOccurs="0" maxOccurs="1" name="amount" type="xs:double" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
</wsdl:types>
- <wsdl:message name="INVOICE_200_300_GetInvoiceDataSoapIn">
<wsdl art name="parameters" element="fsc-svc:INVOICE_200_300_GetInvoiceData" />
</wsdl:message>
- <wsdl:message name="INVOICE_200_300_GetInvoiceDataSoapOut">
<wsdl art name="parameters" element="fsc-svc:INVOICE_200_300_GetInvoiceDataResponse" />
</wsdl:message>
- <wsdl ortType name="INVOICE_200_300_InvoicingWebServicesSoap">
- <wsdl peration name="INVOICE_200_300_GetInvoiceData">
<wsdl:input message="fsc-svc:INVOICE_200_300_GetInvoiceDataSoapIn" />
<wsdl utput message="fsc-svc:INVOICE_200_300_GetInvoiceDataSoapOut" />
</wsdl peration>
</wsdl ortType>
- <wsdl:binding name="INVOICE_200_300_InvoicingWebServicesSoap" type="fsc-svc:INVOICE_200_300_InvoicingWebServicesSoap">
<stk:binding xmlns:stk="http://schemas.microsoft.com/soap-toolkit/wsdl-extension" preferredEncoding="UTF-8" />
<soap:binding xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" transport="http://schemas.xmlsoap.org/soap/http" style="document" />
- <wsdl peration name="INVOICE_200_300_GetInvoiceData">
<soap peration xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" soapAction="http://schemas.fabasoft.com/object/INVOICE_200_300_GetInvoiceData" style="document" />
- <wsdl:input>
<soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal" />
</wsdl:input>
- <wsdl utput>
<soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal" />
</wsdl utput>
</wsdl peration>
</wsdl:binding>
- <wsdl:service name="INVOICE_200_300_InvoicingWebServices">
- <wsdl ort name="INVOICE_200_300_InvoicingWebServicesSoap" binding="fsc-svc:INVOICE_200_300_InvoicingWebServicesSoap">
<soap:address xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" location="http://folio-hofmann/FSC/fscdav/wsdl?WEBSVC=INVOICE_200_300_InvoicingWebServices" />
</wsdl ort>
</wsdl:service>
</wsdl:definitions>

Re: Component tWebServiceInput doesn't run

Anonymous — Wed, 29 Mar 2017 00:31:34 GMT

These posts are useless without the images, why has the Talend forum removed them?