Can't start Talend Data Integration 6.2.1 on linux

Anonymous — Sat, 16 Nov 2024 10:16:01 GMT

Hi!
I installed Talend Data Integration 6.2.1 (trial subscripsion) following instructions from Installation Guide for Linux (my OS is RHEL 7.2).
When the TDI has been installed, I tried to start the server using different commands in the Studio directory:

./Talend-Studio-linux-gtk-x86.sh -nosplash -application org.talend.commandline.CommandLine -consoleLog -data commandline-workspace startServer -p 8002
./Talend-Studio-linux-gtk-x86.sh

Regardless of which command I use, I get the same message :
Talend-Studio-linux-gtk-x86_64:
An error has occurred. See the log file
/opt/etl/TalendToolsStudio-6.2.1/studio/configuration/1478623845701.log.
Log file is attached.
One reason I assume, is absence of dist file which is mentioned in the documentation:

but I did not receive any links to this file.
Thanks in advance!
Pavel
1478622408948.log_20161108-0902.log

Re: Can't start Talend Data Integration 6.2.1 on linux

Anonymous — Wed, 09 Nov 2016 03:24:08 GMT

Hi,
What's the JDK version you are using? The attachment is not available(no url). Could you please upload it again or paste the error message on forum directly?
Best regards
Sabrina

Re: Can't start Talend Data Integration 6.2.1 on linux

Anonymous — Wed, 09 Nov 2016 08:19:20 GMT

Hi Sabrina
Thanks for reply!
I use embedded JRE here: /opt/etl/TalendToolsStudio-6.2.1/jre1.8.0_91
Here is java - version output:

# java -version
java version "1.8.0_91"
Java(TM) SE Runtime Environment (build 1.8.0_91-b14)
Java HotSpot(TM) 64-Bit Server VM (build 25.91-b14, mixed mode)

And here is logfile:

!SESSION 2016-11-08 11:26:48.793 -----------------------------------------------
eclipse.buildId=unknown
java.version=1.8.0_91
java.vendor=Oracle Corporation
BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US
Command-line arguments:  -os linux -ws gtk -arch x86_64
!ENTRY org.eclipse.jdt.launching.macosx 4 0 2016-11-08 11:27:00.825
!MESSAGE FrameworkEvent ERROR
!STACK 0
org.osgi.framework.BundleException: Could not resolve module: org.eclipse.jdt.launching.macosx 
  Unresolved requirement: Require-Capability: eclipse.platform; filter:="(osgi.os=macosx)"
	at org.eclipse.osgi.container.Module.start(Module.java:434)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1582)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1561)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.doContainerStartLevel(ModuleContainer.java:1533)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1476)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1)
	at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:230)
	at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:340)
!ENTRY org.eclipse.jdt.launching.ui.macosx 4 0 2016-11-08 11:27:00.853
!MESSAGE FrameworkEvent ERROR
!STACK 0
org.osgi.framework.BundleException: Could not resolve module: org.eclipse.jdt.launching.ui.macosx 
  Unresolved requirement: Require-Capability: eclipse.platform; filter:="(osgi.os=macosx)"
	at org.eclipse.osgi.container.Module.start(Module.java:434)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1582)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1561)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.doContainerStartLevel(ModuleContainer.java:1533)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1476)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1)
	at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:230)
	at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:340)
!ENTRY org.eclipse.m2e.discovery 4 0 2016-11-08 11:27:00.898
!MESSAGE FrameworkEvent ERROR
!STACK 0
org.osgi.framework.BundleException: Could not resolve module: org.eclipse.m2e.discovery 
  Unresolved requirement: Import-Package: org.eclipse.equinox.internal.p2.discovery.compatibility
	at org.eclipse.osgi.container.Module.start(Module.java:434)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1582)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1561)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.doContainerStartLevel(ModuleContainer.java:1533)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1476)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1)
	at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:230)
	at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:340)
!ENTRY org.eclipse.compare.win32 4 0 2016-11-08 11:27:02.824
!MESSAGE FrameworkEvent ERROR
!STACK 0
org.osgi.framework.BundleException: Could not resolve module: org.eclipse.compare.win32 
  Unresolved requirement: Require-Capability: eclipse.platform; filter:="(osgi.os=win32)"
	at org.eclipse.osgi.container.Module.start(Module.java:434)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1582)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.incStartLevel(ModuleContainer.java:1561)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.doContainerStartLevel(ModuleContainer.java:1533)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1476)
	at org.eclipse.osgi.container.ModuleContainer$ContainerStartLevel.dispatchEvent(ModuleContainer.java:1)
	at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:230)
	at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:340)
!ENTRY org.eclipse.osgi 4 0 2016-11-08 11:27:03.777
!MESSAGE Application error
!STACK 1
java.lang.UnsatisfiedLinkError: Could not load SWT library. Reasons: 
	/opt/etl/TalendToolsStudio-6.2.1/studio/configuration/org.eclipse.osgi/746/0/.cp/libswt-pi-gtk-4430.so: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
	no swt-pi-gtk in java.library.path
	/root/.swt/lib/linux/x86_64/libswt-pi-gtk-4430.so: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
	Can't load library: /root/.swt/lib/linux/x86_64/libswt-pi-gtk.so
	at org.eclipse.swt.internal.Library.loadLibrary(Library.java:327)
	at org.eclipse.swt.internal.Library.loadLibrary(Library.java:236)
	at org.eclipse.swt.internal.gtk.OS.<clinit>(OS.java:39)
	at org.eclipse.swt.internal.Converter.wcsToMbcs(Converter.java:63)
	at org.eclipse.swt.internal.Converter.wcsToMbcs(Converter.java:54)
	at org.eclipse.swt.widgets.Display.<clinit>(Display.java:135)
	at org.eclipse.ui.internal.Workbench.createDisplay(Workbench.java:716)
	at org.eclipse.ui.PlatformUI.createDisplay(PlatformUI.java:162)
	at org.talend.rcp.intro.Application.start(Application.java:92)
	at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
	at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:134)
	at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:104)
	at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:380)
	at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:235)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
	at java.lang.reflect.Method.invoke(Method.java:498)
	at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:648)
	at org.eclipse.equinox.launcher.Main.basicRun(Main.java:603)
	at org.eclipse.equinox.launcher.Main.run(Main.java:1465)
	at org.eclipse.equinox.launcher.Main.main(Main.java:1438)

Do I start Talend correctly when using commands like
./Talend-Studio-linux-gtk-x86.sh -nosplash -application org.talend.commandline.CommandLine -consoleLog -data commandline-workspace startServer -p 8002
./Talend-Studio-linux-gtk-x86.sh
?
My server is hosted in AWS if it matters...

Re: Can't start Talend Data Integration 6.2.1 on linux

Anonymous — Wed, 09 Nov 2016 14:53:30 GMT

Hello again!
The problem was solved - I should have used X Server.
But now I am facing another trouble!
I am able to start Studio by starting ./opt/etl/TalendToolsStudio-6.2.1/studio/Talend-Studio-linux-gtk-x86_64
but it is not exactly what I want to do.
I want to use client-server architectire and to connect to linux server as Talend server from my windows client. So I would have Talend Studio on my laptop where I would design job which would run on linux server. Can I do it with my trial Data Integration Studio? Could you please provide with information what I should to do?
I thought I need to instal Talend-AdministrationCenter. It is said

Unzip the package delivered by Talend: Talend-AdministrationCenter-YYYYYYYY_YYYY-VA.B.C.zip

in the documentation, but I never received any ZIP files with my trial version...

Re: Can't start Talend Data Integration 6.2.1 on linux

Anonymous — Thu, 10 Nov 2016 09:03:30 GMT

Hi,

So far, there is Studio only without TAC server from trial product website.

If you want the whole solution, could you please send an email to sales@talend.com with your requirement TIS server part for trial?

Best regards

Sabrina

Re: Can't start Talend Data Integration 6.2.1 on linux

Anonymous — Fri, 11 Nov 2016 09:17:41 GMT

I did it, thanks.
I would say that it is a bit nontransparent that there is no TAC server in trial version...
Anyway thanks again!

Re: Can't start Talend Data Integration 6.2.1 on linux

Anonymous — Mon, 14 Nov 2016 07:28:59 GMT

Hi,
Thanks for your suggestion. So far, talend administration center, commandline, job server(server part) is a little complicate for community user who want to use talend product for a trial.
Feel free to send an email to sales@talend.com with your requirement(whole solution).
Best regards
Sabrina

topic Re: Can't start Talend Data Integration 6.2.1 on linux in Installing and Upgrading

Can't start Talend Data Integration 6.2.1 on linux

Re: Can't start Talend Data Integration 6.2.1 on linux

Re: Can't start Talend Data Integration 6.2.1 on linux

Re: Can't start Talend Data Integration 6.2.1 on linux

Re: Can't start Talend Data Integration 6.2.1 on linux

Re: Can't start Talend Data Integration 6.2.1 on linux

Re: Can't start Talend Data Integration 6.2.1 on linux