Concatenating 3 fields (Date, Hour, Minute) while using Peek for incremental Loads.

mp802377 — Mon, 25 Apr 2022 13:44:03 GMT

Three main questions.

How do I concatenate the fields from the table below: Date Hour Minute? I have only seen date and time, not where hour and minute were separated like they are.
When you do incremental loads, how do you prevent massive QVDs? If I pulled into a 45 day file, March 10th would drop off? I read Qlikview cannot delete rows.
If I concatenate the Date/Hour/Minute field to 04/20/2022 04:15 and I run it at 4:15, then next run an hour later, will peek know to pull data after the 4:15 time? In doing the incremental load using question #1, the next run an hour later, will it know to pull at 4:16? I have only used peak to peak at the previous file to know what day to run next. Can it do the full time?

I have a dataset. Very simple. There is no identifier (names, ids). I access data that has no personal information in it. I created a field that concatenates all of the fields so it can look for duplication (as there are no identifiers). This is a massive strain on the system as this needs this updated multiple times a day. (see question #3)

Explanation of data:

See table 1. My end goal is to create charts and something similar to table 2. The table contains about 30 million lines for each day. Because of how large the dataset is, I created a Qlikview app that pulled in each day of data and saved it as a QVD. Then I created another application that looks for how many days of data (in a config file), then pulls in that many numbers of days into one large QVD file.

For this simple set of data, I created multiple tables to get to Table 2. I table to identify if the row has been duplicated (there are some that have 134 duplicates). Each row I count as one duplicate. Another table to identify the complete start and end start and end of the entire trip. Another to find out failed. One part of the journey could have been a success, but another part may not have made it.

Date	Hour	Minute	Country	Office_Loc	Type	Parts	PartID	PartNumber	Fail	TrackBegin	TrackEnd
44536	1	12	US	2J56Y	A	3	34513543	1	0	ATLANTA	SAN DIEGO
44536	1	12	US	2J56Y	A	3	34513543	2	0	SAN DIEGO	SAN FRANCISCO
44536	1	12	US	2J56Y	A	3	34513543	3	0	SAN FRANCISCO	TOKYO
44656	1	45	US	J7K5U	A	1	15531542	1	0	DENVER	SAN DIEGO
44656	1	45	US	J7K5U	A	1	15531542	1	0	DENVER	SAN DIEGO
44656	1	45	US	J7K5U	A	1	15531542	1	0	DENVER	SAN DIEGO
44657	1	39	US	D24J2	A	2	24584734	1	0	SEATTLE	DENVER
44657	1	39	US	D24J2	A	2	24584734	2	0	DENVER	ATLANTA
44669	2	5	US	E2N4G	A	3	213431552	1	0	SAN DIEGO	ATLANTA
44669	2	5	US	E2N4G	A	3	213431552	2	0	ATLANTA	NEW YORK
44669	2	5	US	E2N4G	A	3	213431552	3	0	NEW YORK	LONDON
44677	2	24	CA	B35JDJ	R	1	54313158	1	1	SEATTLE	DENVER
44677	2	24	CA	B35JDJ	R	1	54313158	1	1	SEATTLE	DENVER
44655	2	46	CA	GX8H3	R	2	243543345	1	0	TAMPA	DENVER
44655	2	46	CA	GX8H3	R	2	243543345	2	0	DENVER	SEATTLE

Table 2:

Date	Hour	Minute	Country	Duplicates	Office_Loc	Type	Parts	PartID	PartNumber	Fail	TrackBegin	TrackEnd	JourneyStart	JourneyEnd
44536	1	12	US	1	2J56Y	A	3	34513543	1	0	ATLANTA	SAN DIEGO	ATLANTA	TOKYO
44536	1	12	US	1	2J56Y	A	3	34513543	2	0	SAN DIEGO	SAN FRANCISCO	ATLANTA	TOKYO
44536	1	12	US	1	2J56Y	A	3	34513543	3	0	SAN FRANCISCO	TOKYO	ATLANTA	TOKYO
44656	1	45	US	3	J7K5U	A	1	15531542	1	0	DENVER	SAN DIEGO	DENVER	SAN DIEGO
44657	1	39	US	1	D24J2	A	2	24584734	1	0	SEATTLE	DENVER	SEATTLE	ATLANTA
44657	1	39	US	1	D24J2	A	2	24584734	2	0	DENVER	ATLANTA	SEATTLE	ATLANTA
44669	2	5	US	1	E2N4G	A	3	213431552	1	0	SAN DIEGO	ATLANTA	SAN DIEGO	LONDON
44669	2	5	US	1	E2N4G	A	3	213431552	2	0	ATLANTA	NEW YORK	SAN DIEGO	LONDON
44669	2	5	US	1	E2N4G	A	3	213431552	3	0	NEW YORK	LONDON	SAN DIEGO	LONDON
44677	2	24	CA	2	B35JDJ	R	1	54313158	1	1	SEATTLE	DENVER	SEATTLE	DENVER
44655	2	46	CA	1	GX8H3	R	2	243543345	1	0	TAMPA	DENVER	TAMPA	SEATTLE
44655	2	46	CA	1	GX8H3	R	2	243543345	2	0	DENVER	SEATTLE	TAMPA	SEATTLE

Re: Concatenating 3 fields (Date, Hour, Minute) while using Peek for incremental Loads.

marcus_sommer — Mon, 25 Apr 2022 15:31:36 GMT

By 30 M records per day is creating a daily qvd surely a good idea for the historical data. For the current data you may consider of creating hourly qvd's. If there are always just new records it's not bad to have no unique ID else using the timestamp should work quite well. You could create it with:

timestamp(Date + (Hour / 24) + (Minute / 24 / 60)) as Timestamp

and afterwards you may use something like:

load *, timestamp(Date + (Hour / 24) + (Minute / 24 / 60)) as Timestamp;
select * from database;
concatenate
load * from hourly_*.qvd (qvd) where not exists(Timestamp);

Another approach to this type of incremental loading could be to fetch the latest Timestamp from the loaded data and store it within a variable like:

t: load * from hourly_*.qvd (qvd);
concatenate
load *, timestamp(Date + (Hour / 24) + (Minute / 24 / 60)) as Timestamp;
select * from database
where timestamp(Date + (Hour / 24) + (Minute / 24 / 60)) > '$(varTimestamp)';

let varTimestamp = peek('Timestamp', -1, 't'); // if the data are timely ordered

max: load max(fieldvalue('Timestamp', recno()) as max autogenerate fieldvaluecount('Timestamp');

let varTimestamp = peek('max', o, 'max');

By the first load you may not have already a valid variable-value but this could bet set manually (of course more complex and generic solutions are thinkable). Further the showed timestamp-generation might need some adjustments to fit to your data-base because it are Qlik logic/functions - maybe any cast() ...

That's just for the qvd's. For the dashboard you may apply a binary load which contains the last 44 days and to it you could concatenate the hourly qvd's and within a overnight job you creates the daily qvd and updates the binary on this state.

- Marcus

topic Concatenating 3 fields (Date, Hour, Minute) while using Peek for incremental Loads. in QlikView

Concatenating 3 fields (Date, Hour, Minute) while using Peek for incremental Loads.

Re: Concatenating 3 fields (Date, Hour, Minute) while using Peek for incremental Loads.