topic Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200 in QlikView

Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Cyriltra — Mon, 26 Jan 2026 18:19:17 GMT

Hello,

i'm upgrading laptop and i'm using qlikview desktop (personal).

I have 2 .qvw files that i've created and wish to keep using on my new laptop (so i should be within the 4 doc limits of the personal edition).

I'm trying to open 1 file on the new laptop, but seems qlikview is "hanging" for a while.... Is there something else i should do to migrate / upgrade my docs to the latest version ?

old laptop: Qlikview 2019 SR1 12.40.20100

new laptop: Qlikview May 2024 IR 12.90.20200

Thank you so much !

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

marcus_sommer — Wed, 28 Aug 2024 11:05:46 GMT

The application or any popup-window may open on the outside of your screen. Therefore try to enforce to display everything on the main-screen or go to your user-profile (usually here):

C:\Users\YourUser\AppData\Roaming\QlikTech\QlikView

and rename the settings.ini to XXX_settings.ini.

QlikView creates a new one with the default windows-positions for all kind of windows as well as everything else with the defaults. It's not mandatory a fully sufficient solution because you may want to keep various of your settings but you should get a general access to the tool which proves that only the window is on the outside or hidden in any way.

Later you may adjust your origin settings.ini by removing the various window-pos entries which are usually not very important for the most users.

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Maria_Halley — Wed, 28 Aug 2024 11:19:18 GMT

@Cyriltra

You can have more than 4 documents, but you can only move them between computer 4 times.

After changing to the new laptop you should get a question if you want to change owner of the document. After that the document should open normally. There are more info on this in the help

https://help.qlik.com/en-US/qlikview/May2024/Subsystems/Client/Content/QV_QlikView/QlikView_Personal_Edition.htm

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Cyriltra — Thu, 29 Aug 2024 01:17:16 GMT

Hi,

i did this, then when i try to open my document i can see the window to set the language. But after that, the program is still hanging.

There are no other window asking me to change the key or else.

Below is what i have when i open the document and qlikview becomes unresponsive.

I will try to open a version of my document without any data see if that helps. Otherwise, i will work with my IT to downgrade to an earlier Qlikview version.

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Cyriltra — Thu, 29 Aug 2024 01:18:29 GMT

The issue is there is no window asking me to change the owner of the document. The program is simply freezing. OI wonder if it's because i build it under 12.40v and try to now open it with 12.90v

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Cyriltra — Thu, 29 Aug 2024 02:46:29 GMT

So i try with older versions and it's the same. So probably related to my config. Is there any log or anything i can check to understand what is wrong ? I dont see myself recreating my 2 documents...... Thank you

i'm using Windows 11

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

marcus_sommer — Thu, 29 Aug 2024 06:14:07 GMT

I interpret the results of your measurements that there is really a window waiting of an answer from you. Many of the QlikView windows will be closed by clicking on the ESC key - it's of course not a direct solution but if you could afterwards click on any other button, for example to close QlikView and it worked it would prove that the mentioned window exists and isn't blocked by anything.

I suggest you close each other application and then looking again if you could detect the window directly and/or by playing with the various OS display settings and/or with a second/third monitor (multi-monitor settings could be sometimes tricky).

Beside this you could disconnect the laptop from any network and re-starting the machine within the secured mode and then starting QlikView - does anything change?

Another reason for such behaviour might be that your user hasn't the proper rights to read/change/write the settings.ini or any essentiell library/registry part. This may not occur by the installation with an admin-account respectively by providing admin-rights but your normal user might be restricted by any group policy rules and/or if your user-profile is not really kept on the local machine else is within onedrive or has a cloud-synchronization. It shouldn't be very hard for your IT guys to check the profil/access-rights matter.

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Chip_Matejowsky — Thu, 29 Aug 2024 13:21:00 GMT

Hi @Cyriltra,

Following up on @marcus_sommer and @Maria_Halley posts, you can try clearing the [WindowPOS] info from the QlikView Desktop Settings.ini file located in %Users%\<username>\AppData\Roaming\QlikTech\QlikView. Doing so should reset the position of QV Desktop application on the display.

Make a backup of the Settings.ini file
Open the Settings.ini file in a text editor such as Notepad++
Scroll down until you see [Window POS] section & delete the entries in this section
Save the Settings.ini file
Relaunch QV Desktop and try again

Hope this helps!

Best Regards

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Cyriltra — Fri, 30 Aug 2024 00:53:53 GMT

Hello Marcus,

there is no window

I reset the settings.ini file and when i open qlikview i can see it creates a new one. And i see a window to select the language, but after that qlikview becomes again "not responding" (as shown in the window title) and nothing happens, just a the screenshot i showed above and with a "loading" cursor. When i close the qlikview program (by clicking on the Red cross), i have the regular windows message "qlikview is not responding" - Close the program or wait for the program to respond.

I do not think the window that warn me to change the user key or license is showing at all. I tried alt-tab, Win-tab, manually minimize other program etc. I also tried to press ESC or ENTER or SPACE bar.

Next Monday, i will ask my IT to log in my laptop as ADMIN, see if with elevated rights it can work.

Meanwhile, is there any log maybe i can check to understand what is going on ? Or maybe run qlikview in command line to get something out of it than just an unresponsive window ?

Thank you

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Cyriltra — Fri, 30 Aug 2024 00:55:02 GMT

Hi Chip, there is no window, the program becomes just unresponsive when i open it (see my detailed answer to Marcus just above). Is there any log i can check maybe ?

Thank you

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

marcus_sommer — Fri, 30 Aug 2024 06:36:31 GMT

Yes, it sounds strange. AFAIK all user-settings aren't buffered in some way else directly written into the settings.ini. This means if your language-choice itself was successful you should see this new/changed entry immediately within the file. Again it's not a solution but might be helpful to exclude possible causes.

Until recently it was very unlikely that any hardware/software incompatibility happens by the use of the QlikView desktop client - but I'm not sure if this is also true with the new ARM-based machines and the ARM-Windows. Therefore share also the key-facts to your machine + OS.

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Cyriltra — Fri, 30 Aug 2024 07:33:23 GMT

Hi, this is my laptop specs:

Windows 11 Enterprise, version 23H2, Windows Feature Experience Pack 1000.22700.1027.0

Dell Latitude 7340, 13th Gen Intel(R) Core(TM) i7-1365U 1.80 GHz, 16.0 GB (15.6 GB usable)

Thank you

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Cyriltra — Mon, 02 Sep 2024 02:29:10 GMT

Hello,

i spent time with my IT department who elevated my user rights to local admin, but the same issue is occurring. We have also installed QV on one of the admin laptop and try to open my document and same issue. They are now running further tests....

Windows system log provides below information:

And when going into Security and Maintenance panel, we can get the below additional info:

Thank you

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Cyriltra — Mon, 02 Sep 2024 03:28:54 GMT

some progress...

since i installed QV on my newlaptop, i never tried to create a new document on it.

I did it and got the following "warning" and clicked yes.

After that, i try to open the documents i created on my previous laptop and now i got the below dialog box. At least now the program is no longer crashing or hanging. But i still cant open it up... so what should i do next ?

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

marcus_sommer — Mon, 02 Sep 2024 06:26:32 GMT

That are normal responses in regard to use the personal edition - more information about the matter will you find here:

https://help.qlik.com/en-US/qlikview/May2024/Subsystems/Client/Content/QV_QlikView/QlikView_Personal...

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Chip_Matejowsky — Sun, 08 Sep 2024 16:42:05 GMT

Please post a video that demonstrates the issue. Also, the Windows event viewer System and Application logs may have more information.

Best Regards

Re: Qlikview upgrade 2019 SR1 12.40.20100 to May 2024 IR 12.90.20200

Cyriltra — Mon, 09 Sep 2024 01:00:21 GMT

I can no longer do a video as i've already fixed the issue by simply creating a new document first (just after doing the installation).

The issue seems to be that i don't have any available slot to change the user key but the program didn't tell me that UNTIL i create first a document on the new computer. Only after that, when i try to open my old document i have the "failed to load" message.

So now i recreate my documents from scratch on the new laptop