topic Re: Steps for Configuring /Adding Cluster Server in QMC in QlikView

Steps for Configuring /Adding Cluster Server in QMC

kp072017 — Mon, 26 Jan 2026 18:19:17 GMT

Hi All,

Could you please detailed Steps for Adding/Configuring QlikView Server in QMC.

Thanks,

Re: Steps for Configuring /Adding Cluster Server in QMC

Chip_Matejowsky — Tue, 03 Apr 2018 12:39:22 GMT

Hi Karthik,

Are you referring to adding an additional QVS node to an existing QVS cluster? If yes, see Deploying QlikView "Clustering" section, beginning on page 49.

Hope this helps,

Chip

Re: Steps for Configuring /Adding Cluster Server in QMC

kp072017 — Fri, 13 Apr 2018 07:14:34 GMT

Hi,

I want to add another server to an existing Single environment server. So could you please mentions the steps in configuring an additional server to an existing single node server.

And also about the configuration of Accesspoint too.

Thanks

Re: Steps for Configuring /Adding Cluster Server in QMC

Peter_Cammaert — Fri, 13 Apr 2018 07:23:17 GMT

Just install the QVS on another machine, add it to the QMC configuration (QMC->System->Setup->QlikView Servers->Green button) and then configure a server license for this QVS.

AFAIK you cannot add a second QVS to an AccessPoint. You'll have to install a second QVWS as well and link it to the second QVS. And if you don't have a Publisher license, you may not be able to publish documents to the second QVS.

In addition to that, you'll be forfeiting all advantages that come with a clustering setup (like load balancing, resilience and that single AccessPoint). Any particular reason why you intend to do this?

Re: Steps for Configuring /Adding Cluster Server in QMC

kp072017 — Fri, 13 Apr 2018 07:29:26 GMT

Hi Peter,

Thanks for the information. I just wanted to know about the process how it goes.

Thanks,

Re: Steps for Configuring /Adding Cluster Server in QMC

Chip_Matejowsky — Fri, 13 Apr 2018 10:40:45 GMT

Have you reviewed the PDF I linked - https://help.qlik.com/en-US/qlikview/November2017/pdf/Deploying%20QlikView.pdf? This should have all of the information you need. If you stumble during configuration, just post the issue here or contact Qlik Support.

Re: Steps for Configuring /Adding Cluster Server in QMC

anandsai4u — Tue, 05 Jun 2018 07:33:31 GMT

Hi Karthik,

1) Naviage to QMC Console.

2) System-->setup-->Qlikview Server

3) Here you can able to see one "+" symbol in right hand

4) Click on that "+" symbol and add new server.

5) Click on Apply.

6) It will ask for restart QVS Services. So, that we have to click on "OK".

7) Once completed, we can able to see two servers and also we can cross verify under services tab.

Note:- Before Adding new server as a cluster, the QVS LEF should satisfies for server clustering.

Regards

Anand Sai