topic Re: Publisher Error on Load in QlikView

Publisher Error on Load

Mon, 26 Jan 2026 18:19:17 GMT

Hi All,

I have configured a job on Publisher for the first time. Here is the error I get. I am able to see that the QVD file gets generated and I setup the job to write to a log file. All the logs show that records got loaded and QVD generates as usual. Application log also did not show any error. Why does the publisher job Fail then will below errors? am I doing something wrong?

3/19/2013 16:51:31.7127717	Information	Starting task 'DataViz_Product_Dim_Daily_Load_Test'. Id:490c3283-676e-49ca-af16-b8cf4e5c343c. Triggered by 'ManualStartTrigger'. Id:00000001-0002-0003-0405-0607080a0b0c
3/19/2013 16:51:31.7127717	Information	Entering Task Execution.
3/19/2013 16:51:31.7127717	Information	ClusterID=1
3/19/2013 16:51:31.7127717	Information	QDSID=cfcfda3e-3f29-32b0-1d4c-ab3c43763910
3/19/2013 16:51:31.7127717	Information	TaskID=490c3283-676e-49ca-af16-b8cf4e5c343c
3/19/2013 16:51:31.7127717	Information	MaxRunTime=1.00:00:00
3/19/2013 16:51:31.7127717	Information	MachineName=QLIKVIEWD1-JSMV
3/19/2013 16:51:31.7127717	Information	Max attempts:1
3/19/2013 16:51:31.7127717	Information	Current Attempt=0
3/19/2013 16:51:31.7127717	Information	Task Dependencies are OK
3/19/2013 16:51:31.7283967	Information	Document is marked to be Reloaded with fresh data. Initializing Reload for Distribution.
3/19/2013 16:51:31.7283967	Information	Opening "D:\Raghu\Dimensions\Product_Dimension_Daily_Load_QVD_Generator.qvw"
3/19/2013 16:51:31.7283967	Information	Allocating new QlikView Engine. Current usage count=0 of 4 (of type non-reader).
3/19/2013 16:51:31.7283967	Information	Max retries:5
3/19/2013 16:51:31.7283967	Information	Attempt:01
3/19/2013 16:51:33.1815217	Information	Allocated QlikView Engine successfully. Current usage count=1 of 4 (of type non-reader). Ticket number=11.
3/19/2013 16:51:33.1815217	Information	Loading document "D:\Raghu\Dimensions\Product_Dimension_Daily_Load_QVD_Generator.qvw" (0.16 Mb)
3/19/2013 16:51:33.3690217	Information	Physical FileSize=0.16 Mb. Memory Allocation Delta for this file=2.64 Mb. Available Physical Memory Before Open=10726.01 Mb. Available Physical Memory After Open=10719.84 Mb. Total Physical Memory=16383.55 Mb.
3/19/2013 16:51:33.3690217	Information	Attempted to load the document without data.
3/19/2013 16:51:33.3690217	Information	The document was loaded successfully.
3/19/2013 16:51:33.3690217	Information	Document was opened successfully
3/19/2013 16:51:33.3690217	Information	Starting reload
3/19/2013 16:51:33.4158967	Information	QlikView->Settings->Document Peferences->Generate Logfile in document is not set.
3/19/2013 16:51:33.4158967	Information	The Source Document is being reloaded. DocumentPath=D:\Raghu\Dimensions\Product_Dimension_Daily_Load_QVD_Generator.qvw
3/19/2013 16:51:34.3690217	Information	Reloading.
3/19/2013 16:51:34.7127717	Information	The Source Document reload complete. DocumentPath=D:\Raghu\Dimensions\Product_Dimension_Daily_Load_QVD_Generator.qvw
3/19/2013 16:51:34.7127717	Information	Memory Allocation Delta for this file=17.70 Mb. Available Physical Memory Before Reload=10719.83 Mb. Available Physical Memory After Reload=10705.10 Mb. Total Physical Memory=10705.10 Mb.
3/19/2013 16:51:35.3690217	Information	Reloading..
3/19/2013 16:51:35.4627717	Error	The Source Document was NOT reloaded successfully. DocumentPath=D:\Raghu\Dimensions\Product_Dimension_Daily_Load_QVD_Generator.qvw.
3/19/2013 16:51:35.5096467	Information	Closing the document.
3/19/2013 16:51:36.1346467	Information	Closed the QlikView Engine successfully. ProcessID=1284
3/19/2013 16:51:36.1346467	Error	The task "DataViz_Product_Dim_Daily_Load_Test" failed. Exception:

QDSMain.Exceptions.DistributionFailedException: Distribute failed with errors to follow. ---> QDSMain.Exceptions.ReloadFailedException: Reload failed ---> QDSMain.Exceptions.LogBucketErrorException: The Source Document was NOT reloaded successfully. DocumentPath=D:\Raghu\Dimensions\Product_Dimension_Daily_Load_QVD_Generator.qvw.

at QDSMain.ReloadTask.VerifyConditions(TaskResult taskResult)

at QDSMain.ReloadTask.Reload(String fileName, TaskResult taskResult, String sectionAccessUserName, String sectionAccessPassword, eReloadOptions reloadOption, String variableName, String variableValue, Boolean moniterCpuUsage)

--- End of inner exception stack trace ---

at QDSMain.DistributeTask.Execute(TaskResult currentTaskResult)

--- End of inner exception stack trace ---

at QDSMain.DistributeTask.Execute(TaskResult currentTaskResult)

at QDSMain.Task.AbstractTask.TaskExecution(ILogBucket logBucket, TaskResult taskResult)

3/19/2013 16:51:36.1346467	Information	Task Execute Duration=00:00:04.4218750
3/19/2013 16:51:36.1346467	Information	TaskResult.status=Finished
3/19/2013 16:51:36.1346467	Information	Notifying all triggers of new state:FinishedWithErrors
3/19/2013 16:51:36.1346467	Information	Notifying all triggers of new state:FinishedWithErrors - completed
3/19/2013 16:51:36.1502717	Information	Saving Task Result

Re: Publisher Error on Load

Tue, 19 Mar 2013 23:20:08 GMT

Hi All,

I found one thing. I enabled application log.

When I run the file from QlikView Publisher. The end of my log file is:

====

2013-03-19 19:13:02: 0027 Directory J:\7_Logs\Information\

2013-03-19 19:13:02: 0028 STORE Log into Product_Dimensions.txt (txt)

2013-03-19 19:13:02: 0029 SET vLogQvd=

2013-03-19 19:13:02: 0030 END SUB

2013-03-19 19:13:02: 0033 STORE Product_Dimensions INTO J:\\Layer_1\Dimensions\Product_Dimensions.QVD

2013-03-19 19:13:02: General Script Error

2013-03-19 19:13:02: Execution Failed

2013-03-19 19:13:02: Execution finished.

============

When run from Desktop manually:

--------

2013-03-19 19:10:04: 0026
2013-03-19 19:10:04:	1 fields found: LogMessage, 1 lines fetched

2013-03-19 19:10:04: 0027 Directory J:\7_Logs\Information\

2013-03-19 19:10:04: 0028 STORE Log into Product_Dimensions.txt (txt)

2013-03-19 19:10:04: 0029 SET vLogQvd=

2013-03-19 19:10:04: 0030 END SUB

2013-03-19 19:10:04: 0033 STORE Product_Dimensions INTO J:\3_QVD\Layer_1\Dimensions\Product_Dimensions.QVD

2013-03-19 19:10:05: 0035 ENDIF

2013-03-19 19:10:05: 0036 DROP TABLE Product_Dimensions

2013-03-19 19:10:05: Execution finished.

========

Seems like Publisher is not able to execute the Drop Table command....is it related to security.

I am the local admin of the machine and also on the QliKView Administrator group.

I have enables everything on the Security tab of document properties.

Please help.

Thanks

Raghu

Re: Publisher Error on Load

Tue, 19 Mar 2013 23:29:50 GMT

I think the problem is in the line before the drop command, i.e., STORE Product_Dimensions INTO J:\\Layer_1\Dimensions\Product_Dimensions.QVD. It seems that there is a directory name missing in the path.

Re: Publisher Error on Load

Tue, 19 Mar 2013 23:53:07 GMT

I figured out the issue.

The actual path for the QVD store is a network path.

When I run it manually using Desktop, the QVD gets generated on network path.

But Publisher is not able to store the QVD on network path.

Very strange. If the QVW can do it, why would publisher fail. Has anyone seen this before. Any suggestions?

Thanks

Raghu

Re: Publisher Error on Load

Bill_Britt — Wed, 20 Mar 2013 11:59:42 GMT

Publisher is trying to use the Service account to do it. Make sure the Service account has full rights to that share.

Bill

Re: Publisher Error on Load

Wed, 20 Mar 2013 13:09:44 GMT

What is that service account name? I am not sure.

Thanks

Raghu

Re: Publisher Error on Load

Bill_Britt — Wed, 20 Mar 2013 16:43:33 GMT

This would be the Log On As in the Servies Manager. See Below.