topic Re: Qlikview Upgrade in QlikView

Qlikview Upgrade

Jay587 — Mon, 26 Jan 2026 18:19:17 GMT

Hi Team,

Currently we are using Qlikview 12.20 version ,now we are planning to upgrade it to 12.70 (May 2022) version.

Can we go for an upgrade directly from 12.20 to 12.70 ? Please suggest me if any issues in this approach.

Thanks in advance.

Re: Qlikview Upgrade

Maria_Halley — Tue, 24 Jan 2023 11:20:36 GMT

@Jay587

You should be able to upgrade directly. Below is links to the help section about upgrading and an article with more info. I hope this helps

https://help.qlik.com/en-US/qlikview/May2022/Subsystems/Server/Content/QV_Server/QlikView-Server/QVSRM_UpgradeMigrationQlikView.htm

https://community.qlik.com/t5/Official-Support-Articles/A-QlikView-Upgrade-Guide/ta-p/1713389

Re: Qlikview Upgrade

Jay587 — Wed, 15 Feb 2023 12:29:00 GMT

Hello All,

Do I need to install first initial release of Qlikview May 2022 version and then install SR1 of May 2022 for the upgrade ?

Or Can I directly install Qlikview May 2022 SR1 ?

Please suggest me on this.

Thanks in advance.

Re: Qlikview Upgrade

Chip_Matejowsky — Wed, 15 Feb 2023 12:32:50 GMT

Hi @Jay587,

You can directly go to May 2022 SR1 version. Note that May 2022 SR2 was released yesterday. You can download the installation files here.

Best Regards

Re: Qlikview Upgrade

Maria_Halley — Wed, 15 Feb 2023 12:32:50 GMT

@Jay587

In QlikView, the Service Releases (SR) are full installation packages, so you can install QlikView May 2022 SR1 directly.

(In QlikSense you have to install the main version first)

Re: Qlikview Upgrade

Jay587 — Thu, 16 Feb 2023 10:56:57 GMT

Hello ,

Many Thanks for the quick response.

I have one more doubt about the upgrade steps,there is one document(Attached) for the upgrade steps which I found in community and also when I refer the May 2022 upgrade I can see the below link with upgrade steps.

Please suggest me which steps needs to be followed to the upgrade whether it is a document or steps mentioned in below link.

https://help.qlik.com/en-US/qlikview/May2022/Subsystems/Server/Content/QV_Server/QlikView-Server/QVSRM_Installation.htm#

What are the main points to keep in mind when upgrading from 11.20 to 12.70 ?

Thanks in advance.

Re: Qlikview Upgrade

Maria_Halley — Thu, 16 Feb 2023 11:02:14 GMT

@Jay587 You can find the 11.20 to 12.x upgrading instructions here.

https://community.qlik.com/t5/Official-Support-Articles/QlikView-11-20-End-of-Support-Upgrade-Known-Issues-and-changes/ta-p/1712238

Re: Qlikview Upgrade

Jay587 — Tue, 28 Feb 2023 06:15:12 GMT

Hello All,

Do I need to install below setup files before starting the upgrade to Qlikview may 2022 SR2 Version ?

Qlikviewdesktop_x64setup.exe

QlikviewOfflineservice.exe

Qlikviewworkbench.exe

Qvpluginsetup.exe

Please help me on this.

Thanks in advance.

Re: Qlikview Upgrade

Chip_Matejowsky — Tue, 28 Feb 2023 12:03:00 GMT

Hi @Jay587,

These QlikView items do not have to be upgraded prior to upgrading QlikView Server but should be upgraded ASAP so that all of these are running the same build version. Make sense?

Best Regards

Re: Qlikview Upgrade

Jay587 — Thu, 02 Mar 2023 12:10:10 GMT

Hello Again,

We are planning for the Qlikview upgrade to May 2022 version in few days and our current Nprinting version is 19.29.3.0 September 2019.Is there any issues we will face related to Nprinting post upgrading to Qlikview May 2022 ?

And also we are planning to upgrade Nprinting as well after Qlikview upgrade.

Just to know if there will be any issue between these two post Qlikview Upgrade.

Thanks in advance.

Re: Qlikview Upgrade

Chip_Matejowsky — Thu, 02 Mar 2023 13:15:40 GMT

Hi @Jay587,

As I'm sure you're aware, NPrinting 2019 is no longer supported so the compatibility with QlikView May 2022 is not supported as well. You'll need to upgrade NPrinting to version May 2022 as soon as possible in order to be in compliance. Note that NPrinting 2019 may function normally with QlikView May 2022 or it may not. The system requirements for all Qlik Products are available in the Qlik online Help.

Best Regards

Re: Qlikview Upgrade

Jay587 — Thu, 16 Mar 2023 17:28:48 GMT

Hi @Chip_Matejowsky @Maria_Halley ,

We have upgraded Qlikview to may 2022 version but post upgrade Qmc is not opening with https and access point is opening with https somehow.

Earlier both the links are working with HTTPS but after upgrading to may 2022 ,links are not working with https.

Some one from my team long back ,converted to use the links from http to https but I don't know how to do it.

Please help me on this,it's urgent.

Thanks in advance.

Re: Qlikview Upgrade

Chip_Matejowsky — Thu, 16 Mar 2023 23:33:39 GMT

Hi @Jay587,

The settings in the QVManagementService.exe.config likely were overwritten when you performed the upgrade. If you have a backup of %ProgramFiles%\QlikView\ you can check the .config file in the Management Sevice directory for the previous configuration.

If you don’t have a backup, refer to article How to configure the QlikView Management Console (QMC) to use HTTPS.

Best Regards

Re: Qlikview Upgrade

Jay587 — Fri, 17 Mar 2023 05:44:44 GMT

Hi @Chip_Matejowsky ,

Yes in backup file it's like <add key="UseHTTPS" value="True" /> but the current config file is <add key="UseHTTPS" value="false" /> .

When I try to change the condition the access is denied ,seems don't have permission to edit the config file.

I referred the article as well ,seems everything is is in place ,when I binding the certificate also it's showing SSL already created.

Not sure what's going wrong with only qmc.

Thanks.

Re: Qlikview Upgrade

Chip_Matejowsky — Fri, 17 Mar 2023 11:39:31 GMT

Hi @Jay587,

I’m glad to learn there is a backup. Try running Notepad (or another text editing application such as Notepad++) as an administrator by right-clicking the Notepad icon and selecting Run as Administrator. If you don’t have permissions to do so, contact your internal server team and have them make the change on the file.

Best Regards

Re: Qlikview Upgrade

Jay587 — Fri, 17 Mar 2023 14:42:25 GMT

Thank you so much for your extensive support @Chip_Matejowsky .It worked for me.

Qlikview Upgrade successfully completed but still validating in development.

And also please help me with below points.

1.In the QMC, under System > Setup > Qlikview Servers > when I click on server name

I'm only seeing the tabs 'Login' and 'General', whereas on the old setup I see Folders, Documents, Performance, Logging, Security, Alerts, Login.

why the other tabs are not appearing ?

2.Dashboards in access point are opening slowly ,it's taking more time than usual.Please let me know if any checks needed for this.

Many thanks .

Re: Qlikview Upgrade

NadiaB — Tue, 04 Apr 2023 16:41:09 GMT

Hi @Jay587

It is suggested to create a different post for the new issues,

If you don't see all the tabs you likely lost the license, could you reapply the license ? Since the Settings.ini was likely overwritten if you have a backup before the upgrade it would be great to look at it to see what Settings are available there, there are many parameters that can impact performance like the DisableNewRowApplicator so the best option would be to compare those files and then after everything looks as it was before the upgrade probably look into the remaining issues.