topic Re: Qlikview Server error with event id 300 in QlikView

Qlikview Server error with event id 300

santhosh_k_n — Mon, 26 Jan 2026 18:19:17 GMT

Hi,

There is an issue in the QV server, the error with event id 300 is comming during the execution and the error message is fallows,

"The description for Event ID 300 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

qvpx: Exception while handling request

Please any one help on this.

Thanks in advance.

Re: Qlikview Server error with event id 300

Anonymous — Mon, 04 Feb 2013 11:04:36 GMT

Hi,

Look in the QlikView server logs under C:\ProgramData\QlikTech\QlikViewServer (default path) for the Events.log which should hold the full information and see what you have in there.

Re: Qlikview Server error with event id 300

santhosh_k_n — Mon, 04 Feb 2013 11:27:38 GMT

Thanks Johannes,

I checked with the history for the same event id, but the message was,

The description for Event ID 300 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

Extensions: Failed to load extension . Make sure it is available at the correct location

Can you give suggestion on this.

Re: Qlikview Server error with event id 300

maksim_senin — Wed, 06 Feb 2013 06:35:40 GMT

Hi,

I'm not sure my answer will help you at once but some time ago I saw some post (at the Qommunity) with similar issue and as far as I remember the issue was resolved by turning off of some setting at the server or publisher side which is available via QMC but are not covered by license. If this happens during reload it's better to check all the related settings in order to leave only those ones which a covered by your license. We only have a server license and I cannot see something suspicious so if you use publisher check its settings maybe you'll find something strange.

Best regards,

Maxim

Re: Qlikview Server error with event id 300

Bill_Britt — Wed, 06 Feb 2013 19:57:24 GMT

What version are you running. There was a issue and it was corrected with a upgrade or patch.

Bill

Re: Qlikview Server error with event id 300

santhosh_k_n — Thu, 07 Feb 2013 05:49:35 GMT

Hi Bill,

Its QV11 SR1

Re: Qlikview Server error with event id 300

Wed, 29 Jan 2014 11:18:25 GMT

Wich version is correcting the error?

Re: Qlikview Server error with event id 300

Tue, 01 Apr 2014 15:50:15 GMT

Hi Santosh,

Did u migrate your application extensión to the server? I´ve seen a lot of those with customers that did not moved the extensión to the productive server.

Cheers

Re: Qlikview Server error with event id 300

santhosh_k_n — Wed, 02 Apr 2014 07:28:24 GMT

HI Nelson,

This was the bug in the version we were using and got resolved on upgrade.

Re: Qlikview Server error with event id 300

prabhu0505 — Fri, 12 Sep 2014 23:01:24 GMT

I'm facing similar problem in QV 11 SR 7 setup.

Below error message taken from Windows event viewer:

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

CQvXmlInterfaceRequestHandler - Catch: Threw an error...

Any suggestions??

Thanks..

Re: Qlikview Server error with event id 300

Bill_Britt — Sat, 13 Sep 2014 02:41:45 GMT

Hi,

You need to look in the QlikView Server event log.

Bill

Re: Qlikview Server error with event id 300

prabhu0505 — Sat, 13 Sep 2014 05:14:39 GMT

Hi Bill,

Shared the portion of log where exactly it started to fail. Pls. see if you can help.

2014-09-10 14:11:09 2014-09-11 16:00:30 4 700 Information File Upload: File upload initiated (Admin Dashboards/QVSystemMonitor_v5.1.20.qvw)

2014-09-10 14:11:09 2014-09-11 16:00:30 4 700 Information FileClose: Upload completed (Admin Dashboards/QVSystemMonitor_v5.1.20.qvw)

2014-09-11 16:26:21 2014-09-11 16:27:05 4 700 Information CAL usage: Purging obsolete CalData for Server SERVERNAME.

2014-09-11 16:26:21 2014-09-11 16:27:28 1 300 Error CQvXmlInterfaceRequestHandler - Catch: Threw an error...

2014-09-11 16:26:21 2014-09-11 16:27:33 1 300 Error CQvXmlInterfaceRequestHandler - Catch: Threw an error...

2014-09-11 16:26:21 2014-09-11 16:27:38 1 300 Error CQvXmlInterfaceRequestHandler - Catch: Threw an error...

Thanks..

Re: Qlikview Server error with event id 300

Thu, 06 Nov 2014 14:18:03 GMT

I've got this server error because a document cal was assigned to a deleted QVW. See if you have this issue too. You will need to recover the document CAL to this assigned "ghost" document, then restart the services.

Re: Qlikview Server error with event id 300

amien — Wed, 21 Jan 2015 22:27:33 GMT

i fixed this by setting the IIS QlikView application pool also to use the same service account

Re: Qlikview Server error with event id 300

Anonymous — Thu, 05 Mar 2015 22:29:22 GMT

Hi All,

we've recently been suffering a lot of Event ID 300's. the error message is very odd because its saying it can't find our documents in the folder C:\ProgramData\QlikTech\Documents\

Yet we have our documents on mounted folders in the 😧 drive and they are accessed most of the time without issue.

A typical EVENT VIEWER error message looks like this:

SE_LOG: Server - GetDocumentInfo: Failed at create/open document C:\ProgramData\QlikTech\Documents\Policy Information & Commissioning\Health Central - Inpatients Report (App).qvw. GLE(The system cannot find the path specified. )

The QV Event log shows this:

SE_LOG: Server - GetDocumentInfo: Failed at create/open document C:\ProgramData\QlikTech\Documents\Policy Information & Commissioning\Human Resources - FTE Report.qvw. GLE(The system cannot find the path specified.

To me it does not make any sense that the Distribution Server is looking in the C: drive when we have nothing there but the Qlik samples (ie: golf and movies).

Any ideas where we should be looking?

Regards,

John.

Re: Qlikview Server error with event id 300

ariel_klien — Thu, 06 Aug 2015 08:57:15 GMT

Hi John

I'm having the same problem.

Did you find a solution?

Ariel

Re: Qlikview Server error with event id 300

Anonymous — Wed, 02 Sep 2015 23:52:50 GMT

Ariel,

The issue seems to have resolved itself but there is nothing I can concretely say was the cause of the problem. We had other issues at the time relating to poorly constructed Qlikview reports with constraint issues. I also had the server memory doubled from 32gig to 64gig.

Re: Qlikview Server error with event id 300

AliAzizi — Tue, 03 Nov 2015 13:56:41 GMT

Hi Bill

What does the following error mean when there is no ObjectId in the error message and expression is specified as zero (0)?

300 Error E_LOG: Expression Error. Doc: "document name.QVW", ObjectId: , Expr(0)

And when this error will be registered in the event log?

Kind regards

Ali

Re: Qlikview Server error with event id 300

thi_pham — Thu, 30 Jun 2016 07:01:43 GMT

I got the same issue after reinstall Qliksense server 2.1, I tried to import the qvf file to Qliksense desktop 3.0 and got the same error.

Anyone fixed it?

Re: Qlikview Server error with event id 300

Fri, 01 Jul 2016 15:14:39 GMT

Same error in Qliksense server 2.2.3, anyone have a solution ?