topic Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint' in QlikView

Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

Mon, 26 Jan 2026 18:19:17 GMT

Hi!

I'm trying to install QlikView Server with IIS support on Windows Server 2008 R2.

When i opening Access Point, i'm gettimg "Loading Content" all the time.

.NET 4.0.30319 - ok, installed and selected in pool "QlikView IIS",

"...aspnet_regiis -i" - yes, i tried it

i installed Fiddler to analyze the problem and i see "500" error while accessing url "/QvAJAXZfc/AccessPoint.aspx?mark=&platform=browser.MSIE%209.0&dpi=96 HTTP/1.1"

And when i'm trying to open this url in browser, i get:

Server Error in '/QvAjaxZfc' Application.

--------------------------------------------------------------------------------

Could not load file or assembly 'AccessPoint' or one of its dependencies. An attempt was made to load a program with an incorrect format.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.BadImageFormatException: Could not load file or assembly 'AccessPoint' or one of its dependencies. An attempt was made to load a program with an incorrect format.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Assembly Load Trace: The following information can be helpful to determine why the assembly 'AccessPoint' could not be loaded.

WRN: Assembly binding logging is turned OFF.

To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.

Note: There is some performance penalty associated with assembly bind failure logging.

To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

Stack Trace:

[BadImageFormatException: Could not load file or assembly 'AccessPoint' or one of its dependencies. An attempt was made to load a program with an incorrect format.]

System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0

System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +567

System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +192

System.Reflection.Assembly.Load(String assemblyString) +35

System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +123

[ConfigurationErrorsException: Could not load file or assembly 'AccessPoint' or one of its dependencies. An attempt was made to load a program with an incorrect format.]

System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +11569328

System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +485

System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +79

System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +337

System.Web.Compilation.BuildManager.CallPreStartInitMethods() +280

System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +1167

[HttpException (0x80004005): Could not load file or assembly 'AccessPoint' or one of its dependencies. An attempt was made to load a program with an incorrect format.]

System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +11702064

System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +141

System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +4870277

--------------------------------------------------------------------------------

Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.272

Thanks for any help!

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

gainkarthi — Wed, 30 Jan 2013 09:15:07 GMT

Hi,

Please look at the authenticaion method you have selected in IIS.

Regards,

Karthi

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

Wed, 30 Jan 2013 16:31:15 GMT

"Windows Authentication" = "On" (at "Authenticatoin" tab of the "QlikView" site)

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

gainkarthi — Thu, 31 Jan 2013 05:15:41 GMT

Enable Basic authentication as well along with windows authentication for all QV related sites.

Please post your foundings after the above change.

Regards,

Karthi

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

Thu, 31 Jan 2013 06:39:31 GMT

Same problem (

I enabled basic authentication, but nothing has changed

500 Error

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

gainkarthi — Thu, 31 Jan 2013 06:41:33 GMT

IIS application pool is running under the same account as like services running ?

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

Thu, 31 Jan 2013 07:04:45 GMT

I created local user "QlikServerUser" and added it to groups "Administrators" and "QlikViewAdministrators".

And all QV services running under this user. And "QlikView IIS" pool too.

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

gainkarthi — Thu, 31 Jan 2013 07:50:52 GMT

Are you getting login page .. and getting this error after successful login?

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

Thu, 31 Jan 2013 08:03:15 GMT

No, i can see only "Loading content", no any login dialogs.

And 500 error i see via Fiddler

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

gainkarthi — Thu, 31 Jan 2013 09:10:22 GMT

In advanced settings of IIS Qlikview application pool, please check Managed pipeline mode is selected as integrated.

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

Thu, 31 Jan 2013 09:31:31 GMT

Yes, it's "integrated"

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

gainkarthi — Thu, 31 Jan 2013 09:36:20 GMT

Please look at the services status,

You can look at QMC->Status->Services

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

Thu, 31 Jan 2013 09:39:09 GMT

All ok - "runnning"

((

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

gainkarthi — Thu, 31 Jan 2013 10:00:47 GMT

Go to servers tab and click on Qlikview servers take the screenshot of it and do the same for Qlikview webservers. Post the screenshots here.

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

Ricardo_Gerhard — Thu, 31 Jan 2013 11:34:38 GMT

My Suggestions:

- Uninstall Qlikview Server;

- Uninstall IIS;

- Remove c:\programdata\Qliktech;

- Restart;

- Install IIS with ASP, ASP.NET, Basic and Windows Authentication;

- Install Qlikview Server with IIS option;

- Repair or reinstall .Net Framework 4.0

- Restart

- Register your license;

- Open a browser without any config of proxy. Setup to direct access;

It will work.

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

Mon, 04 Feb 2013 05:13:40 GMT

QMC, servers and webservers:

http://img-fotki.yandex.ru/get/5639/30316076.5/0_8cff7_303dcf3_XXL.jpg

http://img-fotki.yandex.ru/get/6438/30316076.5/0_8cff8_ad2c280e_XXL.jpg

http://img-fotki.yandex.ru/get/4118/30316076.5/0_8cff9_48535da5_XXL.jpg

http://img-fotki.yandex.ru/get/5640/30316076.5/0_8cffb_d6c0f751_XXL.jpg

http://img-fotki.yandex.ru/get/5630/30316076.5/0_8cffc_6ee70b55_XXL.jpg

http://img-fotki.yandex.ru/get/5639/30316076.5/0_8cffd_da2ce_XXL.jpg

http://img-fotki.yandex.ru/get/6434/30316076.5/0_8cffe_ef98d8f3_XXL.jpg

http://img-fotki.yandex.ru/get/6432/30316076.5/0_8cfff_d4cf926c_XXL.jpg

http://img-fotki.yandex.ru/get/6424/30316076.5/0_8d000_96249db8_XXL.jpg

http://img-fotki.yandex.ru/get/5634/30316076.5/0_8d001_ec58f2ab_XXL.jpg

http://img-fotki.yandex.ru/get/4136/30316076.5/0_8d002_292b3931_XXL.jpg

http://img-fotki.yandex.ru/get/6427/30316076.5/0_8d003_b44efd58_XXL.jpg

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

gainkarthi — Mon, 04 Feb 2013 05:19:20 GMT

Always loading content dialog is appeared or loading content is disappearing after some time ?

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

Mon, 04 Feb 2013 05:23:46 GMT

Always

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

gainkarthi — Mon, 04 Feb 2013 05:33:34 GMT

Please enable the logging (System -> Setup -> QVS -> Logging) and look for errors.

Re: Server 11 + IIS install problem: Could not load file or assembly 'AccessPoint'

gainkarthi — Mon, 04 Feb 2013 05:34:27 GMT

You can see the log files in the Logfolder defined in the QMC.