topic Qlikview 11 Accesspoint "loading content" in QlikView

Qlikview 11 Accesspoint "loading content"

jaymerry — Mon, 26 Jan 2026 18:19:17 GMT

Hello all,

Qlikview 11 has been installed in our server instead of Qlikview 10.

After the installtion, all the services seem to be ok :

However, when when I try to go on the accesspoint, I have the following message :

Have you got any idea of this problem ?

Thanks for your help,

Best regards,

Jaymerry

Qlikview 11 Accesspoint "loading content"

jaymerry — Wed, 18 Jan 2012 08:43:29 GMT

Here a screenshot of the accesspoint message :

Thanks,

Re: Qlikview 11 Accesspoint "loading content"

hsymomos — Wed, 18 Jan 2012 08:50:42 GMT

Hi Jaymerry,

The .Net 4 is a required in the QV11 installation.

You'd better install the .Net 4 framework before installing the QlikView server.

Hope this helps.

Re: Qlikview 11 Accesspoint "loading content"

p_verkooijen — Wed, 18 Jan 2012 09:31:44 GMT

.NET 4 framework is a requirement for QV11, so this should not be the issue.

Are you using IE / Chrome / iPad / Mobile access
What is your authentication type

Re: Qlikview 11 Accesspoint "loading content"

Tue, 24 Jan 2012 16:24:03 GMT

I have the same issue while using a mobile browser on an android phone and while using Firefox on a windows 7 machine, chrome and IE are fine.

Qlikview 11 Accesspoint "loading content"

jaymerry — Sun, 29 Jan 2012 19:24:36 GMT

Hello all,

I'm trying to go on the access point with IE, on windows 7.

.NET 4 framework is installed ; the authentification type is Ntml..

Have you any idea of this problem ?

Thanks for your help

Qlikview 11 Accesspoint "loading content"

StefanBackstrand — Tue, 31 Jan 2012 07:15:23 GMT

Are you running IIS or QvWebServer? Is the QVS service reporting OK in the QMC? Can you use "Open in Server" from a Developer/Desktop client and get a document list and open documents? Have you tried starting Fiddler (www.fiddler2.com) web debugging tool to see if you get any error responses back from the web server?

Qlikview 11 Accesspoint "loading content"

Mon, 20 Feb 2012 16:40:57 GMT

Hello,

Sometimes I've got the same problem.

The page is not loading and keep showing "Loading Content".

We are using a reverse proxy and we are suspecting that this may cause the problem.

Regards

Kevin

Qlikview 11 Accesspoint "loading content"

Tue, 21 Feb 2012 11:12:05 GMT

Hi all,

I also had this problem with QV11 using IIS.

The problem was solved by using the qlikview webserver instead of IIS.

I suppose there was in the IIS configuration. But, as using the QV webserver is ok for me, I don't search the exact problem.

Qlikview 11 Accesspoint "loading content"

Fri, 24 Feb 2012 10:57:51 GMT

In the url try with the IP address instead of server name

Qlikview 11 Accesspoint "loading content"

antose — Fri, 24 Feb 2012 13:41:40 GMT

Hi!

Have you deleted following Path by mistake?

One of my customers had done that and got the same behavior. Solved by adding the path agin.

Qlikview 11 Accesspoint "loading content"

Bill_Britt — Fri, 24 Feb 2012 16:00:02 GMT

There is a couple of things that will cause this. The first thing to check is to make sure that the QlikView IIS application pool is set for .net V4. If not set it and try again. If that doesn't work then run this command

C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -i and go back check step one.

Qlikview 11 Accesspoint "loading content"

Fri, 02 Mar 2012 16:32:02 GMT

I was able to fix this error!

Following Stefan's advice, I installed and ran Fiddler. This revealed that I was getting a 500 response from the web server, even though AccessPoint just sat there showing the "Loading Content" screen that Jaymerry saw.

So I copied the response text (HTML) out of Fiddler and opened it as HTML in my browser. This is the error message I saw:

Handler "PageHandlerFactory-Integrated" has a bad module "ManagedPipelineHandler" in its module list

So then I followed Bill Britt's advice and ran aspnet_regiis -i, and after that finished everything worked! It took a while for the AccessPoint page to load, so I was nervous for a minute, but I kept my eye on Fiddler and never saw a 500 error. Eventually, the page loaded and I could see my documents!

Qlikview 11 Accesspoint "loading content"

Thu, 08 Mar 2012 16:59:21 GMT

Hello, Were you ever able to fix your reverse proxy issue?

Qlikview 11 Accesspoint "loading content"

Tue, 13 Mar 2012 01:04:43 GMT

Thanks so much. I had the same issue and was able to resolve it with

C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -i

thank you.

Qlikview 11 Accesspoint "loading content"

Mon, 19 Mar 2012 08:24:44 GMT

I have the same Problem. But i got it since Qlikview Server 10. Now on a new machine with version 11 its all the same.

My enviroment:

Windows 7 x64 Machine in local domain

QVWS V11

QVS 11

2 routed network segments

In the 1st segment where the QVS resides connection work perfectly fine from every workstation.

On the 2nd segment i got the above mentioned problem. Fiddler's output: ReadResponse() failed: The server did not return a response for this request. Last opened URL is: POST /QvAJAXZfc/AccessPoint.aspx?mark=&platform=browser.MSIE%206.0&dpi=96 HTTP/1.1

Auth is NTLM, tested over browser auth and alternate login page.

In Version 10 i had a support Session with qliktech but they couldnt find the problem/reason. With normal QV Desktop, connection to the Server is no problem at all.

I dont get it

Qlikview 11 Accesspoint "loading content"

Bill_Britt — Mon, 19 Mar 2012 11:39:51 GMT

Can you explain further on what you mean by segment 1 and segment 2? If you are talking about network segments, I would look at your routing setup on the machine. Does the server know how to get back to the machine that sent the request. You can only have one default gateway so any other path would have to be manually inputted.

Qlikview 11 Accesspoint "loading content"

Thu, 05 Apr 2012 13:54:21 GMT

Routing is perfectly fine, as all other services run without problems. Another webserver for intranet pages also runs fine.

192.16.8.0/22 <-> VPN tunnel <-> 192.16.80.0/24

if the QS couldnt find a way back no page would be displayed. first i thought it could be something with AD authentification. But i also tested it with the alternate login page, that is not displayed in my case. And if i use a normal QV client everything works perfectly fine, except the browser plugin. thats what i dont understand, our QVS 9 version had worked with the same configuration.

Re: Qlikview 11 Accesspoint "loading content"

Fri, 27 Apr 2012 07:08:53 GMT

I had the same problem, and i had to do these steps to get worked

1. Change the Managed Pipeline Mode of DefaultAppPool and Qlikview IIS to Classic

2. Go to the ISAPI and CGI Restrictions on Server LEVEL of IIS and Change to the ALLOWED the ASP.NET 4.0

Qlikview 11 Accesspoint "loading content"

Sat, 19 May 2012 02:26:16 GMT

And if you are using IIS 6, you need to go to Web Service Extensions and make sure ASP.net 4.0 is allowed. See Screen Shot below...