topic Re: Ports in the Firewall (DMZ) in QlikView

Ports in the Firewall (DMZ)

Mon, 26 Jan 2026 18:19:17 GMT

Hello all,

I'm using version 11 282 SR1 QlikView to create the topology of the figure below:

There are two moments, first I need to make it work without SSL (hhtps), second with SSL. I have several questions setup, but now I need to know are the firewall settings (protocol ports, and direction). Internet - DMZ / DMZ - QV.

I checked the manual and I have my guesses, but as changes in the client firewall only happens once a month, I can not lose.

Some details:

- The use SERVER_DMZ IIS

- The 2 servers (SERVER_DMZ and SERVER_QV) will use the same AD

Any help is welcome.

Thank you,

Re: Ports in the Firewall (DMZ)

Bill_Britt — Mon, 01 Oct 2012 12:47:49 GMT

This is a hard question based on your design about. However, I will try to answer. The IIS server has to have port 4747 open to the QlikView server. Each webserver will need port 80 and 443 (I think you said you want both SSL traffic and non SSL traffic to webservers).

This is what QlikView needs. Now there are other issues you might run into like the posts needed for AD to work and anyother Windows communications.

Bill

Re: Ports in the Firewall (DMZ)

Mon, 01 Oct 2012 13:08:19 GMT

Bill,

First I want to thank you for the response.
About your reply I understand that I must open to the AccessPoint running on port 80 and 443 (SSL) and port 4747 in SERVER_DMZ is this? But I also SERVER_QV should not open the doors? 4747/4774?

Thank you,

Re: Ports in the Firewall (DMZ)

Bill_Britt — Tue, 02 Oct 2012 13:05:52 GMT

No, I really don't think you need 4774 open. I would try just opening 4747 and see what issues you have.