topic Bug! Quickly! QlikView November 2017 SR1 and SR2 and SR3. Tell the developers! in QlikView

Bug! Quickly! QlikView November 2017 SR1 and SR2 and SR3. Tell the developers!

warfollowmy_ver — Wed, 20 Dec 2017 08:04:54 GMT

Bug! Quickly! QlikView November 2017 SR1 and SR2 and SR3. Tell the developers!

After reload script the document in desktop, triggers do not see macros!

While I understood this, I broke my head! Tell the developers!

Open the document in the latest version of the desktop QV and click on the reload... If you run the macro after opening, everything works, if you first reload, then does not see the trigger of macro...

Re: Bug! Quickly! QlikView November 2017 SR1. Tell the developers!

felipedl — Wed, 20 Dec 2017 14:09:45 GMT

Hi,

Both ways work for me and I have November SR1 patch.

Only thing I've seen is that when I click the "Reload" button, I have to switch programs (Alt+Tab) so that the reload data message box can be closed, because it freezes up for some reason, and the macro is executed.

Might be something with your local settings, but if I open up a new document and put a message box it works fine.

As I tested it, it wouldn't be considered a bug.

Felipe.

Re: Bug! Quickly! QlikView November 2017 SR1. Tell the developers!

warfollowmy_ver — Wed, 20 Dec 2017 23:22:08 GMT

Made a video, you need to open a document, click on the button. That is, immediately after the opening and reload...

I do not know what I'm doing wrong, it's already checked on three machines...

We did not change any settings...

Re: Bug! Quickly! QlikView November 2017 SR1. Tell the developers!

felipedl — Thu, 21 Dec 2017 11:00:30 GMT

Made exactly as you stated and worked fine for me, just changed the string you were using (the russian alphabet I assume) to Hello World or whatever string and worked ok.

Didn't see any strange behaviour on my end.

Re: Bug! Quickly! QlikView November 2017 SR1. Tell the developers!

warfollowmy_ver — Thu, 21 Dec 2017 13:57:21 GMT

Installed at home, checked, the same mistake ... It's funny...

Let's have someone else put and check, we until two, until 50/50...

Re: Bug! Quickly! QlikView November 2017 SR1. Tell the developers!

rwunderlich — Thu, 21 Dec 2017 14:24:53 GMT

When I reload right after opening, I get the macro window popup as in your video. If I press Cancel and reload again, it works.

I don't know where the problem may be but you might want to talk to QT Support.

-Rob

Re: Bug! Quickly! QlikView November 2017 SR1. Tell the developers!

sfatoux72 — Fri, 19 Jan 2018 13:36:38 GMT

Hello,

I encountered exactly the same problem.

Have you contacted support about this, or have you found a solution?

Thanks

Re: Bug! Quickly! QlikView November 2017 SR1. Tell the developers!

warfollowmy_ver — Fri, 19 Jan 2018 13:53:11 GMT

Hi!

The only solution is to fix the bug to the developer. No others. I rolled back the previous release. That's all I can do for now.

Re: Bug! Quickly! QlikView November 2017 SR1. Tell the developers!

warfollowmy_ver — Tue, 23 Jan 2018 06:57:19 GMT

There was an update 12.20.20300, but the problem remains, some kind of shame ...

Re: Bug! Quickly! QlikView November 2017 SR1 and SR2. Tell the developers!

rwunderlich — Tue, 23 Jan 2018 17:55:57 GMT

Have you opened a case with support? Discussing a bug in this forum will not get the issue reported to Qlik R&D.

-Rob

Re: Bug! Quickly! QlikView November 2017 SR1 and SR2. Tell the developers!

warfollowmy_ver — Wed, 24 Jan 2018 01:17:20 GMT

Our company paid for support only the first year. It is in fact useless, and we refused it, pay for the fact that we will look for bugs and report - this is humor.

There are also users who use the desktop version and I do not have to talk about support, I also want to remind you that today's support xlsx format was done almost 10 years after - it's about support and development.

It's very bad that they will not pass on the information, then I will not write anything here anymore, because it's pointless.

Re: Bug! Quickly! QlikView November 2017 SR1 and SR2. Tell the developers!

xtrimf — Mon, 05 Feb 2018 14:33:00 GMT

I have November 2017 SR1 and have the same issue.

Workaround: adding this line to settings.ini "EnableBnfReload=0" solved this problem.

Its still a bug thou...

Re: Bug! Quickly! QlikView November 2017 SR1 and SR2 and SR3. Tell the developers!

warfollowmy_ver — Fri, 02 Mar 2018 00:01:04 GMT

and SR3

Re: Bug! Quickly! QlikView November 2017 SR1 and SR2. Tell the developers!

sfatoux72 — Fri, 02 Mar 2018 06:28:24 GMT

‌Yes it works well

You could also add the ///$bnf off tag at the top of the script (The tag must be in the first 50 characters of the script).

Re: Bug! Quickly! QlikView November 2017 SR1 and SR2 and SR3. Tell the developers!

warfollowmy_ver — Fri, 02 Mar 2018 08:13:16 GMT

I checked it works. But I have many users of the terminal desktop client, I do not understand what this affects, what is the use of it.

In addition, the vendor claims that it does not recommend disabling it http://www.qlikisrael-support.com/Knowledgebase/Article/GetAttachment/258/2098704.

It is important for me to understand why such a mistake occurs, is it normal? Now I will disconnect, and then because of this there may be new errors in future.

I'm trying to understand why this is even happening and is this a mistake that they will fix?

Re: Bug! Quickly! QlikView November 2017 SR1 and SR2 and SR3. Tell the developers!

sfatoux72 — Fri, 02 Mar 2018 12:32:55 GMT

‌No it’s not normal, it’s a bug introduced with the new BNF script reload mode.

The bug is reported to Qlik R&D and they work to correct it.

In the meantime, you need to stop the new “BNF script reload mode” on application where it’s necessary, like recommended by Qlik on the same document.

Re: Bug! Quickly! QlikView November 2017 SR1 and SR2 and SR3. Tell the developers!

warfollowmy_ver — Fri, 02 Mar 2018 12:37:21 GMT

Clear. For us, this is too time-consuming. There are no problems at the access point. And I will not update the desktop version until I fix it. Thanks for the distinct answer.

Re: Bug! Quickly! QlikView November 2017 SR1 and SR2 and SR3. Tell the developers!

warfollowmy_ver — Thu, 05 Apr 2018 05:36:26 GMT

and SR4

Re: Bug! Quickly! QlikView November 2017 SR1 and SR2 and SR3. Tell the developers!

Anonymous — Thu, 31 May 2018 05:57:10 GMT

Spent much of the day troubleshooting this as it worked fine in our previous setup (12.10.206 SR8). We upgraded to 12.20.206 SR5 early this week and found the .bat files were terminating without generating an email. After much research, what I found is exactly what everyone is discussing here, it is a bug. After many trial and errors, I found a simple solution to the problem. I went back to our old environment (12.10.206 SR8) and copied the qv.exe file. I placed the copy of the file on the desktop of the new server using the admin account. I then edited the .bat file to point to the old version of the qv.exe on the desktop and not the qv.exe under C:\Program Files\QlikView.

You may need to edit the Windows Task and delete the 'Actions' and create a new one that points to the new/altered file. Windows Task Scheduler once again firing OnPostReload. Hope this helps!

Example .bat file

"C:\Users\qvservices\Desktop\Qv.exe" /l /NoSecurity "C:\ProgramData\QlikTech\Documents\08QlikView_Dashboards\Email_Test.qvw"