Skip to main content
Announcements
Save $600 on Qlik Connect registration! Sign up by Dec. 6 to get an extra $100 off with code CYBERSAVE: REGISTER
cancel
Showing results for 
Search instead for 
Did you mean: 
kp072017
Partner - Contributor II
Partner - Contributor II

Steps for Configuring /Adding Cluster Server in QMC

Hi All,

Could you please detailed Steps for Adding/Configuring QlikView Server in QMC.

Thanks,

1 Solution

Accepted Solutions
Chip_Matejowsky
Support
Support

Have you reviewed the PDF I linked - https://help.qlik.com/en-US/qlikview/November2017/pdf/Deploying%20QlikView.pdf? This should have all of the information you need. If you stumble during configuration, just post the issue here or contact Qlik Support.

Principal Technical Support Engineer with Qlik Support
Help users find answers! Don't forget to mark a solution that worked for you!

View solution in original post

6 Replies
Chip_Matejowsky
Support
Support

Hi Karthik,

Are you referring to adding an additional QVS node to an existing QVS cluster? If yes, see Deploying QlikView "Clustering" section, beginning on page 49.

Hope this helps,

Chip

Principal Technical Support Engineer with Qlik Support
Help users find answers! Don't forget to mark a solution that worked for you!
kp072017
Partner - Contributor II
Partner - Contributor II
Author

Hi,

I want to add another server to an existing Single environment server. So could you please mentions the steps in configuring an additional server to an existing single node server.

And also about the configuration of Accesspoint too.

Thanks

Peter_Cammaert
Partner - Champion III
Partner - Champion III

Just install the QVS on another machine, add it to the QMC configuration (QMC->System->Setup->QlikView Servers->Green button) and then configure a server license for this QVS.

AFAIK you cannot add a second QVS to an AccessPoint. You'll have to install a second QVWS as well and link it to the second QVS. And if you don't have a Publisher license, you may not be able to publish documents to the second QVS.

In addition to that, you'll be forfeiting all advantages that come with a clustering setup (like load balancing, resilience and that single AccessPoint). Any particular reason why you intend to do this?

kp072017
Partner - Contributor II
Partner - Contributor II
Author

Hi Peter,

Thanks for the information. I just wanted to know about the process how it goes.

Thanks,

Chip_Matejowsky
Support
Support

Have you reviewed the PDF I linked - https://help.qlik.com/en-US/qlikview/November2017/pdf/Deploying%20QlikView.pdf? This should have all of the information you need. If you stumble during configuration, just post the issue here or contact Qlik Support.

Principal Technical Support Engineer with Qlik Support
Help users find answers! Don't forget to mark a solution that worked for you!
anandsai4u
Creator
Creator

Hi Karthik,

1) Naviage to QMC Console.

2) System-->setup-->Qlikview Server

3) Here you can able to see one "+" symbol in right hand

4) Click on that "+" symbol and add new server.

5) Click on Apply.

6) It will ask for restart QVS Services. So, that we have to click on "OK".

7) Once completed, we can able to see two servers and also we can cross verify under services tab.

Note:- Before Adding new server as a cluster, the QVS LEF should satisfies for server clustering.

Regards

Anand Sai