Unlock a world of possibilities! Login now and discover the exclusive benefits awaiting you.
Hi,
this is for partial reload without the publisher
ill assume you know how to use the API,
it helps to search the 'QMS API Documentation', you can find it here -
QMS API Documentation - Version 11
in the api if you search 'partial' you get 'TaskReloadMode Enumeration' so from that we understand there might be a chance (-:.
lets look at 'C:\ProgramData\QlikTech\DistributionService\Tasks' there we can see the xml of all the tasks, and we can also find the task ID so we can delete the task or run it
creating partial reload starting from a point where we have no tasks at all (you can have tasks but just for this example):
1. create the first task by going to: QMC -> Documents -> select the document we want to partial reload (development.qvw) -> Reload tab -> choose any: i did: Daily -> Apply
a file was created in the task folder with the name: 'Task_39614ba7-0628-4264-ac31-b553ba3a0862.xml'
2. go to: Status -> Tasks -> verify a task was indeed created 'Reload of Development.qvw'
3. open visual studio and run the following code: (some changes is needed to adjust for your file, here we want to apply it to 'Development.qvd')
// Initiate backend client
IQMS apiClient = new QMSClient();
// Get a time limited service key
ServiceKeyClientMessageInspector.ServiceKey = apiClient.GetTimeLimitedServiceKey();
// Get QlikView Server
ServiceInfo qds = apiClient.GetServices(ServiceTypes.QlikViewServer).FirstOrDefault();
DocumentNode document = apiClient.GetUserDocuments(qds.ID).Where(x => x.Name.Equals("Development.qvw", StringComparison.OrdinalIgnoreCase)).FirstOrDefault(); //Get first source document for this example
DocumentTask documentTask = new DocumentTask();
documentTask.QDSID = qds.ID;
documentTask.Document = document;
documentTask.Reload = new DocumentTask.TaskReload();
documentTask.Reload.Mode = TaskReloadMode.Partial;
documentTask.General = new DocumentTask.TaskGeneral();
documentTask.General.Enabled = true;
documentTask.General.TaskName = "Partial Reload of Development.qvw";
documentTask.General.TaskDescription = "Creating a task via QMS API";
documentTask.Scope = DocumentTaskScope.General;
Guid triggerID = Guid.NewGuid();
// Create a scheduled trigger
ScheduleTrigger st = new ScheduleTrigger();
st.ID = triggerID;
st.Type = TaskTriggerType.OnceTrigger;
st.Enabled = true;
st.StartAt = DateTime.Now;
// Create a list of trigger and add the scheduled trigger
List<Trigger> List_Trigger = new List<Trigger>();
List_Trigger.Add(st);
documentTask.Triggering = new DocumentTask.TaskTriggering();
documentTask.Triggering.Triggers = List_Trigger;
documentTask.Triggering.TaskDependencies = new List<TaskInfo>();
documentTask.Triggering.ExecutionAttempts = 1;
documentTask.Triggering.ExecutionTimeout = 0;
// Scope plays an important role
documentTask.Scope = DocumentTaskScope.General | DocumentTaskScope.Triggering;
//Create task
apiClient.SaveDocumentTask(documentTask);
4. see the task 'Partial Reload of Development.qvw' was created, try running it - NOTHING HAPPENS!, how do we know, because we opened the 'Development.qvw' file in the qlikview client and did Settings -> Document Settings -> General tab -> Generate Logfile & Timestamp in Logfile Name, and no log file was created )-:, now lets run the the 'Reload of Development.qvw', we can see a log file was created,
also a new file was created in tasks 'Task_6c92c573-a395-47e2-8e75-a15f0d128b46.xml'.
5. now here is where the magic happens:
a. open both tasks xmls in notepad++ (from 'C:\ProgramData\QlikTech\DistributionService\Tasks')
b. make sure you opened notepad++ using 'run as administrator'
c. now copy all the data from 'Reload of Development' ('Task_39614ba7-0628-4264-ac31-b553ba3a0862.xml' if we open both xmls the names are inside) to the 'Partial Reload of Development.qvw' ('Task_6c92c573-a395-47e2-8e75-a15f0d128b46.xml') and save the file EXCEPT 'DistributeTask' open node, so basically all the lines except the first two.
d. restart the 'QlikView Distribution Service' from Start -> Administrative Tools -> Services
e. now run the the task - VOILÀ the task is running!, problem is, its doing a full reload )-:
f. open the xml again of the 'Partial Reload of Development.qvw' search for 'LoadType' in the 'SourceDocument' node and change it to 'PartialReload', restart the 'QlikView Distribution Service' again, run the task from the qmc.
g. if you dont want the trigger in the xml you can remove it otherwise the partial task will run with the trigger settings, this is the line:
<ScheduleTrigger ID="0afcc688-06c2-4925-93ac-d153a298cb5d" Enabled="True" EnableDateTime="2014-01-01 00:00:00Z" ExpireDateTime="9999-12-31 23:59:59Z" RecurrenceType="RecurrenceDaily" RepeatEvery="1" HourStart="2014-01-01 02:00:00Z" DayStart="0" RepeatMaxCount="0" />
that's it! you have partial reload
you might want to delete some tasks, copy the task ID (name of task is inside the file) and run the code:
IList<TaskInfo> taskList, docTaskList;
List<string> taskstoremove = new List<string>();
taskstoremove.Add("6c92c573-a395-47e2-8e75-a15f0d128b46");
foreach (var item in taskstoremove)
{
try
{
var taskID = new Guid(item);
var task = apiClient.GetTask(taskID);
apiClient.DeleteTask(taskID, TaskType.DocumentTask);
}
catch (System.Exception ex)
{
response.Append(ex.Message);
}
}
you might want to run the task, this is no problem, create any app, console app or .net app what ever you want and run the code:
apiClient.RunTask(new Guid("6c92c573-a395-47e2-8e75-a15f0d128b46"));
CAUTION! CAUTION! CAUTION!
do not delete any of the xml's (from 'C:\ProgramData\QlikTech\DistributionService\Tasks') deleting them without first delete them from code using 'DeleteTask' will crush 'QlikView Distribution Service' on restart and you wont be able to start the service again after stopping it!!!
hope this helped!.
im not sure this is the only solution, we don't have the Publisher licence so there might be other solutions using the publisher.
im not sure what happens if you delete the original task the 'Reload of Development.qvd' im too lazy to test it
P.S.:
for some reason i just cant get any of the api methods to return all tasks,
iv tried the api apiClient.GetTasks and the apiClient.GetTasksForDocument while looping over all docs, nothing worked.
maybe it's because we don't have publisher, finally iv found a work around:
// Initiate backend client
IQMS apiClient = new QMSClient();
// Get QlikView Server
ServiceKeyClientMessageInspector.ServiceKey = apiClient.GetTimeLimitedServiceKey();
var serviceList = apiClient.GetServices(ServiceTypes.QlikViewServer);
List<TaskInfo> taskInfoList = new List<TaskInfo>();
TaskStatusFilter taskStatusFilter = new TaskStatusFilter();
taskStatusFilter.TaskStatuses = new List<TaskStatusValue>();
taskStatusFilter.TaskStatuses.Add(TaskStatusValue.Aborting);
taskStatusFilter.TaskStatuses.Add(TaskStatusValue.Completed);
taskStatusFilter.TaskStatuses.Add(TaskStatusValue.Failed);
taskStatusFilter.TaskStatuses.Add(TaskStatusValue.Running);
taskStatusFilter.TaskStatuses.Add(TaskStatusValue.Waiting);
taskStatusFilter.TaskStatuses.Add(TaskStatusValue.Warning);
List<TaskStatus> taskStatuses = apiClient.GetTaskStatuses(taskStatusFilter, TaskStatusScope.Extended); // A service call.
foreach (var taskStatus in taskStatuses)
{
taskInfoList.Add(apiClient.GetTask(taskStatus.TaskID));
}
from here you can easily run task by name or what ever. (-:
iv attached the project solution and the xmls.
a good way to run the code is to create a console application (EXE) and run it with button macro that runs that application, in this example i compiled a small program that runs the partial reload, it searches for task with the name 'partial' on the 'development' document.
Sub ScriptPartialReload
set v = ActiveDocument.GetVariable("vLastPartialReloadAttempt")
v.SetContent now(),true
rem msgbox("Partial")
set v = ActiveDocument.GetVariable("vFileName")
vFile = v.GetContent.String
Platform = ActiveDocument.Evaluate("ClientPlatform()")
if isnull(Platform) or Len(Platform)=0 then
ActiveDocument.PartialReload
else
Set shell = CreateObject("WScript.Shell")
shell.Run "C:\QlikViewTasks\qv-user-manager.exe -t partial -d " + vFile
end if
End Sub
this will only work if you enabling the Allow macro execution on server and Allow unsafe macro execution on server on your Qlikview Server Managment Console.
Go to System->Setup->Qlikview Servers->Security tab.
you might also need to enable macros in the document
Go to Tools -> Edit Module -> Requested Module Security: System Access, Current Local Security: Allow System Access
the final result is:
adding in the end of the load script this part unable you to create a smart behavior for the reload button
IF(IsPartialReload()) THEN
LET vLastPartialReload = Now();
ELSE
LET vLastReload = Now();
ENDIF
in the reload button properties in 'Enable Condition' write
=Interval(vLastPartialReload - vLastPartialReloadAttempt, 'ss') > 0
and now the button will be disabled until the end of the reload process.
Please
If you found it helpful (-:.