10 Replies Latest reply: Jun 17, 2015 1:48 AM by Marco Bombonato RSS

    QV server error at event viewer

    Dafnis X

      Hi,

      The following errors appear almost daily in the event viewer:

      SE_LOG: Server - ConnectToLoaded: Could not connect to loaded file (errId=-3)

      Could not acces the file XXXX\yyyy Model.qvw (e=-3)

       

      Windows Server 2012 R2

      The QV server version is : 11.20.12664

       

      Does anyone know what can cause it?

       

      Thanks!

       

       

        • Re: QV server error at event viewer
          Giuseppe Novello

          Dafnis,

           

          Do you have section access on that document?

           

          Gio

          • Re: QV server error at event viewer
            Giuseppe Novello

            Marco,

             

            So you see the error right after you login into the document? What version of Qlikview do you have install?

             

            Gio

              • Re: QV server error at event viewer
                Marco Bombonato

                No,

                the error in the event viewer comes out when I clik on the link.

                The first error is:

                "The description for Event ID 300 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

                If the event originated on another computer, the display information had to be saved with the event.

                The following information was included with the event:

                SE_LOG: Server - ConnectToLoaded: Could not connect to loaded file (errId=-3)"

                The second is:

                "The description for Event ID 300 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

                If the event originated on another computer, the display information had to be saved with the event.

                The following information was included with the event:

                SE_LOG: Server: Could not acces the file AsseDashboard_I.qvw (e=-3)"

                Then come a warning:

                "The description for Event ID 500 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

                If the event originated on another computer, the display information had to be saved with the event.

                The following information was included with the event:

                Document Load: The document C:\QlikViewDocumentRoot\AsseDashboard_I.qvw failed to load because of no access [15]."

                 

                And when I put my credential, qlikview open the document e comes this warning:

                "The description for Event ID 500 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

                If the event originated on another computer, the display information had to be saved with the event.

                The following information was included with the event:

                SE_LOG: MetaService - HasAccess: Checking access to open following document AsseDashboard_I.qvw"

                 

                 

                We have the version 11.20.12664.0 x64 bit.

                 

                Thanks  a lot.