9 Replies Latest reply: Jun 15, 2016 7:01 AM by Shaun Jansen Van Nieuwenhuizen RSS

    Strange errors on QlikviewServer

    Shaun Jansen Van Nieuwenhuizen

      Good day,

       

      We have an environment with 4 Qlikview servers, one running published/reloading engine, 2 web servers, and 1 physical/accespoint (QvServer).

       

      Lately users have been receiving abnormal disconnections from the server, and extremely slow behavior of the environment.

       

      Before this happened, there were windows patches installed (around 5 weeks ago) and ever since then I have received very alarming errors that I cannot find anywhere else.

       

      Please see below the errors, I am running QV12SR2, running QlikviewWebserver. These errors spam hundreds of times a day. Any suggestions or recommendations to fix the issues would be greatly appreciated.

       

      Error1:

      The description for Event ID 300 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

       

       

      If the event originated on another computer, the display information had to be saved with the event.

       

       

      The following information was included with the event:

       

       

      Session: WaitForAllRequestsToPost timeout, 1 remaining

      Error2:

      The description for Event ID 300 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

       

       

      If the event originated on another computer, the display information had to be saved with the event.

       

       

      The following information was included with the event:

       

       

      QVGeneral: SERVER - DMR: Validate and Apply Hex. UsrName()

      Error3:

      The description for Event ID 300 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

       

       

      If the event originated on another computer, the display information had to be saved with the event.

       

       

      The following information was included with the event:

       

       

      QVGeneral: CQvXmlInterfaceRequestHandler - CatchAll: Ino(-1). Fno(91). Threw an error...

      Error4:

      The description for Event ID 300 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

       

       

      If the event originated on another computer, the display information had to be saved with the event.

       

       

      The following information was included with the event:

       

       

      GetCategories: Threw an error...

      Error5:

      The description for Event ID 300 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

       

       

      If the event originated on another computer, the display information had to be saved with the event.

       

       

      The following information was included with the event:

       

       

      Restart: Server aborted trying to recover by restart. Reason for restart: Internal inconsistency, type CRT, detected.

      Error6:

      The description for Event ID 300 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

       

       

      If the event originated on another computer, the display information had to be saved with the event.

       

       

      The following information was included with the event:

       

       

      Core dump: Core dump result = 1

      Error5 followed by warning:

      Connection lost. Reconnect to server: <THE SERVER IP>

      Some more random erros:

      Request failed: m_Comm.Receive() received zero bytes.

      The description for Event ID 300 from source QlikViewServer cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

       

       

      If the event originated on another computer, the display information had to be saved with the event.

       

       

      The following information was included with the event:

       

       

      StdServer: void CStdServer::DoMsgReceived (CQvMsgActiveProtocol*, CConstQvMsg): pContext->AuthenticatedUser.IsEmpty () && ServerSettings::AuthenticationLevel == 2, will throw EQ_LOCERR_FILE_CORRUPT