Image export failures may be due to some configuration errors. The following must be checked:
Insufficient system resources: Low Qlik Sense, QlikView and NPrinting System resources can cause this issue. Please do performance monitoring to check for Peak CPU and RAM usage that on all NP QS and QV servers. NPrinting has the ability to exhaust a production Qlik Sense or Qlikview server if those servers are not sufficiently provisioned with enough RAM in particular. https://community.qlik.com/t5/Official-Support-Articles/Finetuning-and-preparing-your-NPrinting-202x...
Assistance/suggestions mode for the Qlik Sense charts is not supported. Ensure it is disabled for all the objects imported in the report.
The imported object ideally will be a native Qlik Sense chart object. 3rd party extensions may result in unexpected results. Contact your extensions vendor for 3rd party extension support
For a listing of compatible, built-in Qlik Sense objects, check the compatibility matrix found in the following link to better understand specific Qlik Sense object limitations with NPrinting reporting. Working with Qlik objects
Check that 'In' and 'Out' bound ports between the Qlik NPrinting server Qlik NPrinting engine and the Qlik Sense server are configured. Keep in mind that Ports 4997 and 443 must now also be configured since November 2018 release of Qlik NPrinting.
Check that ports 2727 and 15672 are not being used by any other process/program on the NPrinting server and engine computers. These ports are required for normal NPrinting operation. See Ports - Qlik NPrinting
Check that the Qlik Sense objects and or Qlik Sense visualization used in your NPrinting report are supported as per the "Keep in Mind" section above
Check for the use of a Qlik Sense proxy 'prefix' in the Qlik Sense Management Console. If one exists, via the NP web console, the prefix must be added to the NP connection string ie: https://qlikserver1.qlik.com/qlik
Check to see if anything has been entered into Additional Response Headers under the Qlik Sense Virtual Proxy being used (select Advanced to view), if so remove and test.
Abort all running Task and On Demand Task executions then reboot the Qlik NPrinting Server, Qlik NPrinting Engine computer and the Qlik Sense server at the first available opportunity and retest if the issue still persists. Ensure all services on each computer are up and running before retesting.
If the issue persists after checking all points above, please check the solutions in the resolutions section of this article.
To ensure editing the correct file, please do the following before proceeding as directed below:
Open windows File Explorer
Click 'View' tab
In 'Show/Hide' area of the 'View' ribbon, Click checkbox "File Name Extensions" in order to show the full file name
Resolution 2
GRPC error: Check NP CEF Engine log file: May be represented by the error: "The remote server returned an error: (401) Unauthorized" . (Internal JIRA defect reference: OP-8814)
Check that the path to the QMC proxy is the same as the connection path used in the NP connection proxy address path.
You must also ensure that port 443 and port 4997 are not blocked in your environment as mentioned in the article description.
If Resolution 1 and 2 above do not resolve the issue and all image export requirements are met, check and perform the steps below:
Stop the NPrinting Engine Service.
Open the renderer.config file in C:\Program Files\NPrintingServer\NPrinting\Scheduler. You may need to open the file in administrator mode.
Make a backup copy of the file.
Add (or modify if present) the following parameter: <add key="webrenderer-timeout-sec" value="120" /> 120 is the time in seconds for the timeout. It can be increased up to 300 if necessary and retest.
Restart the NPrinting Engine service
Increasing these timeout values may lead to improved performance as NPrinting may simply need more time to execute tasks and report generation. These changes also need to be made after an NPrinting upgrade. NP Config files are overwritten during the upgrade process.
How to Enable 'Logging'
If resolutions above have not resolved the issue, please perform the following steps and reproduce the issue one again in order to retrieve debug logging necessary for a deeper investigation. Then zip and upload the requested debug logs below up to the support case.
assistance/suggestions mode is enabled (it is currently on the road map to have this feature fully supported)
the chart is an unsupported 3rd party extension (map extensions for example). See article below regarding Qlik Sense extensions and how to enable them for image export.
In some cases, image web rendering default time while connected to Qlik Sense needs to be adjusted perhaps due to network latency or other network performance related issues
Communication between the NPrinting server and the Qlik Sense server is discovered to be problematic.
The Qlik Sense server itself could be overloaded and not responding to the NPrinting server in a timely manner.
When NPrinting is used in conjunction with Qlik Sense Deployments From September 2018 and higher where "HTTP" is used rather than "HTTPS", specific CEF or GRPC errors will be logged. See article Qlik NPrinting Unexpected CEF rendering exception with HTTP connection for more information.
Invalid path used in the NP connection 'proxy' address path. Path used with the NP connection should be the same as the path used to open the QMC or QS Hub
Error logging to look for NPrinting Logs: "Failed to open a resolver for connection" and "The remote server returned an error: (403) Forbidden"
