Skip to main content
Announcements
Have questions about Qlik Connect? Join us live on April 10th, at 11 AM ET: SIGN UP NOW
cancel
Showing results for 
Search instead for 
Did you mean: 
Anonymous
Not applicable

Win 2008 R2: Failed to install QlikSense Server - Error 0x800b010a: Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\PostgreSQL

Hi! I just tried to install QlikSense Server 1.0 GA on a Win2008R2 VMWare. I can go through the setup-steps (tried both: Quick and Custom Installation), but when the setup starts to install files the setup does stop+rollback. Logfile shows some issue with PostgreSQL. See below. Has anyone expierenced similar issues?

See attached the full installation log.

Best regards,

Roland

[07C0:0A98][2014-09-22T09:26:46]i000: In Update Progress: 7
[0888:0BA8][2014-09-22T09:26:46]e000: Error 0x800b010a: Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\PostgreSQL
[0888:0BA8][2014-09-22T09:26:46]e000: Error 0x800b010a: Failed to verify signature of payload: PostgreSQL
[0888:0BA8][2014-09-22T09:26:46]e310: Failed to verify payload: PostgreSQL at path: C:\ProgramData\Package Cache\.unverified\PostgreSQL, error: 0x800b010a. Deleting file.
[0888:0BA8][2014-09-22T09:26:46]e000: Error 0x800b010a: Failed to cache payload: PostgreSQL
[07C0:0A98][2014-09-22T09:26:46]e314: Failed to cache payload: PostgreSQL from working path: C:\Users\ADMINI~1\AppData\Local\Temp\{69b895ab-4711-473b-b0fc-f957992a2d0f}\PostgreSQL, error: 0x800b010a.
[07C0:0A98][2014-09-22T09:26:46]e349: Application requested retry of payload: PostgreSQL, encountered error: 0x800b010a. Retrying...
[0888:0BA8][2014-09-22T09:26:47]e000: Error 0x800b010a: Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\PostgreSQL
[0888:0BA8][2014-09-22T09:26:47]e000: Error 0x800b010a: Failed to verify signature of payload: PostgreSQL
[0888:0BA8][2014-09-22T09:26:47]e310: Failed to verify payload: PostgreSQL at path: C:\ProgramData\Package Cache\.unverified\PostgreSQL, error: 0x800b010a. Deleting file.
[0888:0BA8][2014-09-22T09:26:47]e000: Error 0x800b010a: Failed to cache payload: PostgreSQL
[07C0:0A98][2014-09-22T09:26:47]e314: Failed to cache payload: PostgreSQL from working path: C:\Users\ADMINI~1\AppData\Local\Temp\{69b895ab-4711-473b-b0fc-f957992a2d0f}\PostgreSQL, error: 0x800b010a.
[07C0:0A98][2014-09-22T09:26:47]e349: Application requested retry of payload: PostgreSQL, encountered error: 0x800b010a. Retrying...
[0888:0BA8][2014-09-22T09:26:47]e000: Error 0x800b010a: Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\PostgreSQL
[0888:0BA8][2014-09-22T09:26:47]e000: Error 0x800b010a: Failed to verify signature of payload: PostgreSQL
[0888:0BA8][2014-09-22T09:26:47]e310: Failed to verify payload: PostgreSQL at path: C:\ProgramData\Package Cache\.unverified\PostgreSQL, error: 0x800b010a. Deleting file.
[0888:0BA8][2014-09-22T09:26:47]e000: Error 0x800b010a: Failed to cache payload: PostgreSQL
[07C0:0A98][2014-09-22T09:26:47]e314: Failed to cache payload: PostgreSQL from working path: C:\Users\ADMINI~1\AppData\Local\Temp\{69b895ab-4711-473b-b0fc-f957992a2d0f}\PostgreSQL, error: 0x800b010a.
[0888:0BA8][2014-09-22T09:26:47]i351: Removing cached package: VCRedist, from path: C:\ProgramData\Package Cache\15D032D669078AA6F0F7FD1CBF4115A070BD034D\
[07C0:0864][2014-09-22T09:26:47]e000: Error 0x800b010a: Failed while caching, aborting execution.
[0888:0AEC][2014-09-22T09:26:47]i330: Removed bundle dependency provider: {69b895ab-4711-473b-b0fc-f957992a2d0f}
[0888:0AEC][2014-09-22T09:26:47]i352: Removing cached bundle: {69b895ab-4711-473b-b0fc-f957992a2d0f}, from path: C:\ProgramData\Package Cache\{69b895ab-4711-473b-b0fc-f957992a2d0f}\
[07C0:0864][2014-09-22T09:26:47]i000: Navigation to bookmark Next was initiated.
[07C0:0864][2014-09-22T09:26:47]i399: Apply complete, result: 0x800b010a, restart: None, ba requested restart:  No
[07C0:081C][2014-09-22T09:26:48]e000: SetupResult: -2146762486
[07C0:081C][2014-09-22T09:26:48]e000: Failing MSI name (if any): 
[07C0:081C][2014-09-22T09:26:48]i000: GetStringPropertyActivity retrieved the value C:\Users\ADMINI~1\AppData\Local\Temp\Qlik_Sense_20140922092525.logfrom property WixBundleLog
[07C0:081C][2014-09-22T09:26:48]i000: Trying to navigate to InstallFailureView
[07C0:087C][2014-09-22T09:26:48]i000: The ViewModel Bootstrapper.UI.ViewModels.InstallFailureViewModel was initialized.
1 Solution

Accepted Solutions
Anonymous
Not applicable
Author

Hi!

wow, all my old support guys in a single thread! great

- I created a new clone from a fresh win2008r2 vmware

- I connected the vmware to the internet (so the qvsense setup downloaded .NET 4.0 automatically this time)

--> in the first place the setup failed again with a different error message (some access issue to the .msi package)

Then I realized that UAC (User Access Control) was still active on the machine.

After turning UAC off, the qliksense setup worked fine. So I assume this was the reason for my original issues as well.

Unfortunately we haven't got our partner license yet, even we have requested it at release date; @Sonja that's the reason why I haven't opened a support tickte on this!

Thx all & best regards,

Roland

View solution in original post

10 Replies
Not applicable
Author

Hi Roland,

is this a fresh VM or was there any QlikView / Qlik Sense install before? Never seen an issue before with the Postgre install.

I would suggest to fill a case through the portal so we can investigate this issue direct.

Let us know how you do. Please mark the appropriate replies as helpful / correct so our team and other members know that your question(s) has been answered to your satisfaction.
Regards
Daniel Zanders
QlikSupport
Not applicable
Author

Hi Roland, I hope you are doing fine

Do you have internet access on the server?

Also, are you running everyting with Administrator account?

Thanks!

Regards

Katarina

Not applicable
Author

And it is, of course, a good idea to check that you have the necissary certifiactes installed as well. See attachement!

Anonymous
Not applicable
Author

Hi Anna!

Good to hear you!

Nope - no internet. Is it now a requirement to have internet available during installation?

I will doublecheck internet connectivity & certificates!

Thx,

Roland

Not applicable
Author

Hi again

Not really a requirement I think, but I read somewhere that you could get this error if you did not have connection to internet while installing Postgre, so if would be interesting to know if this actually is the problem!

Have a great day,

Regards

Katarina

Sonja_Bauernfeind
Digital Support
Digital Support

Hello Roland,

I would recommend you bring this to our Technical Support, should the information you've received here not help just yet. Keep in mind that licensed Qlik Sense Server installations are fully supported by Qlik, and we are looking forward to hearing from you there.

Kind Regards,

Sonja

Don't forget to Like posts and use the "Accept as Solution" button on content that answered your question! Thanks 🙂
Bjorn_Wedbratt
Former Employee
Former Employee

Hi Roland,

You're missing some root certificates required to validate the MSI-files included in the installation package.

PostgreSQL.msi is digitally signed using Verisign Class 3 Code Signing 2010 CA with a counter signer GloalSign Timestamping CA - G2.

Both these must be trusted, so make sure you have GlobaSign Root CA and Verisign Class 3 root certificates in your certificate store.

Anonymous
Not applicable
Author

Hi!

wow, all my old support guys in a single thread! great

- I created a new clone from a fresh win2008r2 vmware

- I connected the vmware to the internet (so the qvsense setup downloaded .NET 4.0 automatically this time)

--> in the first place the setup failed again with a different error message (some access issue to the .msi package)

Then I realized that UAC (User Access Control) was still active on the machine.

After turning UAC off, the qliksense setup worked fine. So I assume this was the reason for my original issues as well.

Unfortunately we haven't got our partner license yet, even we have requested it at release date; @Sonja that's the reason why I haven't opened a support tickte on this!

Thx all & best regards,

Roland

Not applicable
Author

Thanks for letting us know how it was solved !