Unlock a world of possibilities! Login now and discover the exclusive benefits awaiting you.
Hello,
At the moment I have two triggers, one for the connection: so that the metadata connection reload takes place early in the morning and another trigger on the publish task so that the report is published in the afternoon.
but what I'm looking for is if there are any possibilities to configure a trigger condition in Nprinting to ensure that the publish task is only executed when this metadata connection is successfully reloaded,
Thank you very much for your help
Hi,
I am trying to set up oAuth M2M impersonation and have set up the client in Qlik.
Trying out this example with this body:
{
"client_id": "*****************",
"client_secret": "***************",
"grant_type": "urn:qlik:oauth:user-impersonation",
"user_lookup": {
"field": "subject",
"value": "SUBJECT_VALUE"
},
"scope": "user_default"
}
I got this error:
{
"errors": [
{
"title": "Could not find a user to impersonate",
"detail": "Could not find user with identifier of subject and value of SUBJECT_VALUE",
"code": "OAUTH-41",
"status": "400"
}
],
"traceId": "5f1d309e40ca23dea9cd9558e1061d00"
}
Since I don't have any users except tenant admins the error seems correct.
My question now is how do I create the user on the Qlik side that I want to impersonate?
I don't want to send an email to someone inviting them and I don't want to set up a full IDP described here.
Hi All,
I am creating 4 different filter panes with 4 different expressions in each. My expressions are as below
=Aggr(If(CNLevelOrder < 13, Replace(CNLevelSelect, 'No. of days', 'Days')), CNLevelSelect)
=Aggr(If(CNLevelOrder > 13 and CNLevelOrder <29, Replace(CNLevelSelect, 'No. of days', 'Days')), CNLevelSelect)
=Aggr(If(CNLevelOrder <46 and CNLevelOrder >29, Replace(CNLevelSelect, 'No. of days', 'Days')), CNLevelSelect)
=Aggr(If(CNLevelOrder >46, Replace(CNLevelSelect, 'No. of days', 'Days')), CNLevelSelect)
My requirement is to select Show CNLevelSelect values in Filterpane with some filtering condition and whatever the field value have No. of days as left characters replace with Days, for example No. of days to request ----Days to request
When I am selecting particular value from any filter other filterpanes are not showing anything and more over other data is also not affecting when selecting any value from filterpane
what could be the issue....
It would be so grateful , if anyone helps!!!
Thanks.
Hi there,
We are looking to deploy existing Qlikview/QlikSense apps and build new QlikSaaS apps on QlikCloud.
We currently have a large third party team supporting Qlik. They have access to QMCs via a specific AD group, so they are able to reload task chains/apps if they fail. They also have access to the servers/ folder structures, so they can make fixes to apps and can then deploy new versions.
However, we have learnt in QlikSaaS, the owner of a published dashboard cannot be changed and is alao single user. As only this owner can start a reload and overwrite a published app (we think) ... We wondered how an external support team can continue to do reloads and make changes as part of incidents?
Is any one else in this situation? Or are there some different approaches you are taking to support and maintenance?
Thank you!
Hi,
I'm looking for a way to create a knd of glossary of all apps, graphs, dimensions, measures existing in our Qlik Cloud.
The goal is to easily find all the graphs that are based on a certain dimensions and/or measure.
Thanks,
Amélie
Hi All,
I am working on VizLib replacement for one of my Qlik Dashboard. In the dashboard one of the sheet have VizLib Filter pane chart in which Dimension has taken CNSelect, and in conditional filtering =IF(ONLY({1} CNOrder)<13,True(),False()) expression has applied
in 2nd filter pane =IF(ONLY({1} CNOrder)<25 AND ONLY({1} CNOrder)>12,True(),False()) this expression has applied
2 filter panes has formed . I have selected value from 1st Filter pane and also value from 2nd filter pane, so it has not removed value from 1st filter pane when selected value from 2nd filter pane.
I need to implement exactly same with native Filter pane object in frontend only
Please help, it would be so helpful when someone solves this
Thanks!!
Hello,
I have a need to be able to integrate maps published in ArcGIS Portal. It is important that the maps are integrated with tabular data in QlikSense, so that the content of the maps adapts to the selection.
For example, I want to be able to filter on all roads with a certain speed limit in the dashboard, then only these roads should be shown on the map.
In the community there is an instruction on how this can be done for "ArcGIS online". I am unable to follow this instruction. Parts of this instruction are not relevant as ArcGIS Portal is located on a local intranet.
I have tried creating WMS, WFS and custom map services without success. I would be very grateful if someone could make a step by step instruction.
Thanks in advance!
/Tomas
Hi all,
How can we determine if the dashboard has successfully reloaded after a failure without manually checking it? We would like to receive an email notification about this. Is there any way to achieve this? Please help.
We currently receive alert emails for failed reloads, and we would like to also receive alerts for successful reloads following a failure,
If above one not works ,we would like to receive a single email by the end of the day summarizing all load history, including both failures and successes
Thanks
Hello Experts,
I'm working with a set of sales data I've encountered an issue with "Previous Month" measures.
The measure is intended to sum the "Amount" values from the previous month based on the maximum date selected, but it returns zero even though there are relevant data entries.
Below is my Data
SalesDate | Product | Amount |
10/1/2023 | Chair | 50 |
15/1/2023 | Fan | 100 |
24/2/2023 | Chair | 82 |
23/2/2023 | Fan | 72 |
14/3/2023 | Chair | 132 |
13/3/2023 | Fan | 56 |
10/1/2024 | Chair | 50 |
15/1/2024 | Fan | 100 |
24/2/2024 | Chair | 82 |
23/2/2024 | Fan | 72 |
14/3/2024 | Chair | 132 |
13/3/2024 | Fan | 56 |
Measure for Sum of Amount for Selected Month (Working Correctly):
sum({<SalesDate = {">=$(=MonthStart(Max(SalesDate)))<=$(=MonthEnd(Max(SalesDate)))"}>} Amount)
Measure for Sum of Amount for Selected Previous Month (Returning Zero):
sum({<SalesDate = {">=$(=MonthStart(AddMonths(Max(SalesDate), -1)))<=$(=MonthEnd(AddMonths(Max(SalesDate), -1)))"}>} Amount)
I have attached my QVF File as well.
Could anyone help identify why the measure for the previous month might be returning zero and suggest how to fix this issue?
Thank you
Hi Team,
After upgrading TDC to version TDC-8.1-20240419, we encountered this issue while setting up SQL Server in TDC. MITI/bridges/javabridgeinterface/MimbGenericOperationBridgeInterface; nested exception is: MITI.sf.client.axis.gen.MimbAgentFault: MITI/bridges/javabridgeinterface/MimbGenericOperationBridgeInterface. How to resolve this error .please find snapshot.
Thanks
Mrunal
Wondering about Qlik Talend Data Integration Sessions? There are 11, in addition to all of the Data & Analytics. So meet us in Orlando, June 3 -5.
Browse our helpful how-to's to learn more about navigating Qlik Community and updating your profile.
Your journey awaits! Join us by Logging in and let the adventure begin.
Qlik enables a frictionless migration to AWS cloud by Empresas SB, a group of Chilean health and beauty retail companies employing 10,000 people with 600 points of sale.
Qlik Luminary Stephanie Robinson of JBS USA, the US arm of the global food company employing 70,000 in the US, and over 270,000 people worldwide.
Join one of our Location and Language groups. Find one that suits you today!
A private group is for healthcare organizations, partners, and Qlik healthcare staff to collaborate and share insights..
Qlik Communityの日本語のグループです。 Qlik製品に関する日本語資料のダウンロードや質問を日本語で投稿することができます。
Welcome to the group for Brazil users. .All discussions will be in Portuguese.
Hear from your Community team as they tell you about updates to the Qlik Community Platform and more!